2007 window seal replacement to 2008 version, without removing door panel?

I really don't want to pry on the plastics on my door panels or fully remove them. Has anyone gave this thought without just jumping in and removing the door panel can it be done without doing that?

You will always risk scaring up plastics by removing all those pieces and I'm super picky so rather not, I will deal with tint scratches before I do that.

thanks for any advice.

Removing the door panels are not nearly the challenge you're making them out to be.

I read your other post about the tint.

Most places will actually put the felt on the seal if you tell them. Just call your tint guy and ask.

If not, taking the door panel off is super easy and doesn't involve any prying.

You don't have to take it completely off to change the seal anyway, just enough to pull it from the door, the handle mechanism inside can be annoying to get off, but really even then it's not tough.

There is no need to remove the door panels to replace the window seals.

6-Speed said:

There is no need to remove the door panels to replace the window seals.

Click to expand...

I was hoping to hear that I used have youtube the change and they removed it. Any insight? \I will order a set thanks

If you're going to get a set, you should get them from Tousley/White Bear Lake... about half the cost of LMR