New Personal Best in the Lethal Performance 2018 GT A10

black03

black03

Authorized Vendor
Authorized Vendor
Joined
Jul 4, 2002
Messages
8,247
Location
paradise
We went to Palm Beach International Raceway this morning to make some passes and I'm definitely happy with the results. The last time at the track before the holidays the best I could get out of the car on the stock calibration and drag radials was [email protected]. Then I broke the driver side halfshaft on the 1-2 shift.

Since then we installed a set of the DSS 2000hp Pro-Series Axles, DSS Carbon fiber driveshaft and a driveshaft loop from BMR Suspension.

Then we loaded up a Lund Racing E85 tune with an SCT BDX device and ended up with a new personal best of [email protected].

27332586_10156266809494015_1192748215541546269_n_zpsmtncuwix.jpg


That's a solid half of a second and 3mph more than the stock calibration yielded us.

I'm always trying to compare our times down here to those up North but always have to keep in mind we are located here in S. Florida and basically race out in the swamp. The DA this morning when the 11.68 run was made was +400ft.

For any of you guys with a 2018 Auto car I highly recommend putting in halfshafts before hitting the track. Trust me on that one. lol

If you have any questions let me know.

SCT BDX with Lund Racing Custom tune
https://www.lethalperformance.com/sct-bdx-performance-programmer.html
40490_4.png


DSS 2000hp Axles and Carbon Fiber Driveshaft
https://www.lethalperformance.com/d...rated-pro-level-axle-left-and-right-side.html
dss_l_axle_1_2.jpg


https://www.lethalperformance.com/d...c-3-8-carbon-fiber-1-piece-cv-driveshaft.html
carbon_cv_shaft_without_plates_6.jpg


https://www.lethalperformance.com/catalogsearch/result/?q=DSL017
dsl017r.jpg
 
GNBRETT

GNBRETT

Well-Known Member
Established Member
Premium Member
Beer Money Bros.
Joined
Oct 14, 2010
Messages
4,606
Location
Middle Earth
CF DS was one of the best mods I ever made to my car. Less vibration, less noise, less weight and quicker acceleration.
 
GNBRETT

GNBRETT

Well-Known Member
Established Member
Premium Member
Beer Money Bros.
Joined
Oct 14, 2010
Messages
4,606
Location
Middle Earth
11.49 or quicker or slicks require one. I'm betting this car will be quicker then 11.49 soon.

but they aint gonna catapult ur car in the air like an steel or aluminum one will so it doesn't serve a lot of purpose imo with a CF DS.

they jus crumble into little pieces and make quite the mess on the starting line usually.

50stangpower said:
Why do you need a driveshaft loop with a carbon fiber driveshaft?
Click to expand...
 
50stangpower

50stangpower

Well-Known Member
Established Member
Joined
Oct 19, 2015
Messages
1,148
Location
Westminster MD
GNBRETT said:
11.49 or quicker or slicks require one. I'm betting this car will be quicker then 11.49 soon.

but they aint gonna catapult ur car in the air like an steel or aluminum one will so it doesn't serve a lot of purpose imo with a CF DS.

they jus crumble into little pieces and make quite the mess on the starting line usually.[/QUOTE

Right I umunderstand the rule, just thought carbon fiber over ruled it.
Click to expand...
 

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)


Top