Just curious what gap people are running with setup making 26 PSI or more through a twin screw with stock ignition coils? Let me know please.
Did my first pull with a stock lower and 2.75 upper pulley on my Whipple 2.9 STD inlet, it pulled solid until 5000 RPM then started breaking up. I'm not sure if it is spark blowout or a weak coil. It built 26 PSI by 4500 RPM. I'm leaning toward a weak coil but just curious what plug gap has worked for others at this boost level.
Sent from my Pixel 2 using Tapatalk
Did my first pull with a stock lower and 2.75 upper pulley on my Whipple 2.9 STD inlet, it pulled solid until 5000 RPM then started breaking up. I'm not sure if it is spark blowout or a weak coil. It built 26 PSI by 4500 RPM. I'm leaning toward a weak coil but just curious what plug gap has worked for others at this boost level.
Sent from my Pixel 2 using Tapatalk
Last edited: