Search results

Hello, I finally upgraded to the 13/14 CF driveshaft with Tob's adapter. So I take the car for a drive and I hear a strange humming sound coming from the rear end. It only came on at higher RPMs and load didn't seem to effect the noise. I took the car back and lifted it up, I checked the pinion...

Hello, so I just added an oil temp sensor and want to datalog it with the X4. If I log with livelink the equations work correctly but when I configure a datalog and export it to the X4, the analog signals do not change, and if I try to change the units I don't see the new equation I added. How...

Hello everyone, I finally found the perfect wheels. They have the right looks, size, don't weigh a ton and don't cost a fortune. Anyway, these will be used on the street and on the track (road course). The easy solution to my problem is to not run TPMS. However, I'd like to have the connivence...

Hello everyone, I recently went to my first open track event and a lot happened. So I figured I'd start a series of threads regarding my questions. This is so the replies are focused on one issue and to make it easier for others to find what they're looking for. Little background, I've been...

Hello every one, So I finally went to my first open track event :cool: (more on this later) and I think I experienced brake fade. Two days before the event I changed my old pads to Hawk HPS and brake fluid to Motul DOT 5.1 (rated to 522*). The new pads had a great initial bite and didn't need...

There is a huge debate regarding whether or not upgrading the IC pump will make any difference, but as far as I know no one shared their experience and what the effect on IAT2 was. I always liked the argument that Ford's engineers felt the necessity to upgrade the pump for 13, and where I live...

Hey guys, I'm in the process of upgrading to the 13/14 IC pump. I've got everything installed so I'm pretty much finished. However, when trying to burp the system I know the pump is running but there is no flow in the tank. I'm stumped.

Hello guys, a friend of mine just got himself a Camaro SS and people were recommending xforce exhaust. Their mufflers come with an internal butterfly and a remote so you can go from quite to loud. I was really intrigued and saw that they offer them for the GT. Two questions, I'm almost sure...

Hello guys, so ever since I installed Autometer gauges I've been keeping an eye on them to see how the car runs. For oil pressure, last year I was running Motorcraft 5w50 and at idle I was seeing 25PSI, and at ~1700RPM and above 75PSI. Between idle and 1700 pressure would build linearly from...

Hello everyone, so the GEN II made quite a ruckus when it came out, and rightly so because it was supposed to be the solution for the 1-2 lockout. It has been literally dissected, piece by piece. Pretty much every body got one and yet, I did not see any reviews. Most likely because its winter...

Hello guys, I just got around to install my fuel pressure gauge but there is a problem. I have Shelby's adapter and they say to not put any kind of sealant on the threads because it might clog up an injector. Tried it that way and the little plug was leaking, even after I tightened it pretty...

Hello guys, so a friend of mine has an 01 GT and we installed a 2.1 KB, but so far its been nothing but problems. We've replaced the following: -Fuel pump, AEM 320 LPH -Injectors, 60 lb -MAF, SCT 3000 -Spark plugs, NGK TR6 When the tuner first fired it up it idled fine then it idled rough, we...

Hello everyone, Last year a thread about heat exchangers started quite a debate on which is best. After everything is said an done, no one provided actual data on their setup, so I thought I'll start. Here is the thread for reference...

Hello guys, a friend of mine have a 2001 GT and we ran into a strange problem. Only when the A/C is on, the car feels/behave like its hesitating, but there is no loss of power and no check engine light. It happens in 1st, 2nd and 3rd, mostly above 2K RPM. When I'm accelerating slowly or holding...

I'm in the process of installing a wideband kit and I need the location of the stock O2 sensor input wire on the ECU. I'v searched and looked at picture and I couldn't figure out a thing, so I need your help.

I'm in the market for gauges and I need some feedback on which to get. Gauges in question are AEM wideband and PLX DM6, initially I was going for AEM but then I stumbled upon PLX and I liked what I saw. Its cheaper, has more features and looks better. So anyone have any experience with PLX...

So I'm getting ready to store my GT500, but this is my first time so I need your help. So far I know I need to unload the suspension but beyond that I have no clue. Possibly the more important question, is it better to store a car than to let someone turn it on (or drive it?) every now & then...

Mods on car are: -VMP Triple pass H/E & Morso tank -Magnaflow Muffler Delete -BMR LCA & UCA So basically its stock. It put down 456whp & 437wtq on a Mustang dyno! :rockon: I was expecting 420-430, especially in our wether. I'm really proud of her :coolman:

Hi, so I've been trying to see what my IAT2 was but I think I'm doing it wrong. I'm getting values in thousands, avg was 9800 :shrug:. I'm logging the right PID, ACT2. So what am I doing wrong?

Hey guys, I'm getting ready to buy some more goodies for my car, and I came across the 13/14 fan. Where I live heat is our enemy, first thing I bought was the H/E, all cooling mods are on my priority list. My last experience with a cobra and heat didn't go very well, and now I'm really cautious...

Hi, I just bought a 170 T-stat and the instructions say its recommended to adjust the fans, and I was putting off buying a tuner until getting one with your power pkg. So, the questions is if I do get a tuner now will you email me a tune later? and will its cost be included in the pkg? knowing...

I'm getting ready to ship the Shelby home, and I have been looking for a good shipping company but no luck. So I thought I'd ask you guys for your input, if anyone shipped his car overseas please share your experience. What company did you use? Cost? Did the car arrive safe and sound? Anything I...

Hello guys, First of all, I have to thank the members here who helped me decide on what to do on my previous thread. Although I didn't get the ones I mentioned. Also, a big thanx to my cousin, if it weren't for him I wouldn't have done anything until summer. So, she is black with alloy stripes...

UPDATE Hello, I'm in the market for an 09 Shelby GT500 it must be 2009, preferably Orange, Grey or Blue and stock Price is 34K max.

Hello everyone, so I finally managed to save up for a GT500. Just like the title says, I need your opinion on the ones I found so far. I know that its a good idea to wait, but in my case I have little time & money and I have been looking for a month now. I'm looking for an 09 because I...