Search results

I have an 06 low mileage 43k to be exact gt mustang with a 2.6 Kennedy Belle on it BBK long tube headers, 3 inch flow master exhaust, mgw shifter, ShaftMasters aluminum one piece drive shaft. Now prior to the shifter and a driveshaft the car put down 440 to the wheels. Now as most have commented...

I was wondering if the Brembo brakes off a 2012 GT500 would fit an 06 s197?

Hey guys I was wondering if someone can help me out. I have been searching high and low for the Shelby Cobra Desk Lamp for my son's birthday and cannot find it anywhere. I have contacted Shelby directly and summit racing and neither have it. They also use to sell it at cracker barrel, but to no...

As the title states I have a spare Hydraulic throw out bearing that is brand new. Will fit V6 - 05, 06, 07, 08, 09, 10 Bullitt - 08, 09 GT - 05, 06, 07, 08, 09, 10 Retails on American Muscle for $150.00 Asking $110.00 obo plus shipping Cheers.

Need help picking a new clutch currently putting down 440 to the wheels on kenne bell 2.6... I plan on building the motor in the future but I'm currently running the stock clutch and flywheel which has held fine, but I noticed its starting to slip a little when I really get on it. So need some...

Today on my way back from house hunting came across a red new gen wrx not sure of the year I'm guessing 2014 or 2015. He was riding my *** until we came to a light that was a long stretch of road and nothing in sight so he swerves quickly in the other lane. I slowly rolled out as the light...

I came across a 1 piece aluminum Steeda Driveshaft that has been previously used it is a 4 inch and I wanted to get some opinions on what I should look for or be concerned about before I pull the trigger and buy it. Here are some pics. http://miami.craigslist.org/mdc/pts/4911708988.html

I took every ones advice and am getting rid of my Michelin Pilot Super Sports because I literally smoke them through second gear. I currently am putting out 440 to the rear and wanted to know what options everyone recommends. I was looking at the tires on American Muscle and there is only three...

I drive a 2006 Mustang GT with a Kenne Bell blower puttin down a healthy 440 hp to the wheels I recently did some suspension upgrades like lower and upper control arms and a panhard bar as well I've put some nice sticky Michelin Pilot Super Sports which are 295/30/20 in the rear and 255/35/20 in...

I was on my way home from rehab with my dad in my 06 GT with a 2.6 Kenne Bell putting 500 to the wheels. So this clean red charger pulls up along side me as we are going through a curve no less and decides to get on the gas to impress his girl. So I wasn't in the mood cause this teenage punk...

Currently I'm running 255/35/20 on the front and 295/35/20 on the rears I'm running Continental Super Sports but Id like to know what others recommend. I've come into some hard times my old man had a stroke so spending 1500 in tires is not an option at the time so I'd like a good tire that will...

Here's my predicament I have an 06 Gt with the GT500 front end conversion unfortunately my splitter cracked on an oversized speed bump (compliments of miami engineering) anyhow i wanted to know where i could pick up another splitter for a reasonable price and all bolts that comes with it...

I currently have 2 tens in the trunk but my front right sub in the door seems to have gone out... so I was wonsering what everyone recommends for replacements. I was hearing good things about the Kicker replacement but would like some more feedback. Also the 6x8's what is everyone running cause...

So here is my queston are 2011's 5.0 to 2015 5.0 to be feared especially being a 3v with a blower? I was looking to get some runs in with a buddy of mine who has a 5.0 with a tune. Obviously I know the 5.0s are formidable but could a 3v with a 2.6l kenne pushing 440 hold its own? Flame suit...

Here's my predicament I have a kenne bell right now on my 06 putting down 440 rwhp and I was contemplating on changing out the stock gearino for some 3.73's keep I'm mind this is a DD/Street Driven car so should I stick with the 3.55's or move on up?

I have over 30k on the clock and was wondering when would be a good time to change out the oil on my blower?

So I recently just purchased my sequential harness and love the way the lights flash however I would like to switch the stock bulbs for LED's so I wanted to know what size bulb they take for the rear and do they need any kind of resistor or is it just plug and play. I know AM has them, but I...

:banana::banana::banana::banana:.... All I have to say is I have just installed them in my car and I say if you have the coin spend it on this simple little mod took 30 minutes and it was all done I finished before I could finish my beer. I purchased it through Ebay with a lifetime warranty the...

I just got home and parked my 06 mustang get as I pulled the auxiliary cable from my phone the radio started to flicker on and off but the car was running fine.... so I shut the car off and when I went to go start it the thing wouldn't turn over at all it would click click click but wouldn't...

I've searched high and low and I keep getting good told by Kenne Bell that my serpentine belt is a custom size which is 122.3 inch 6 rib made by bando and they are charging $46 which I find to be a bit ridiculous anyone know any other manufacturers that sell this size and dimension. Thanks

Its come to that time that I have become bored with the power output my car is dishing out currently I drive an 05 Mustang GT converted to a GT500 with all the little go fast goodies and styling I'm running a Kenne Bell 2.6 Stage 2...BBK Longtube Headers...X-Pipe... No Cats running to 3 inch...

Hey fella's I have a quick question I'm getting some squeaking coming from my serpentine belt I have a 2006 Mustang GT with a 2.6 Kenne Bell and a 3 1/2 pulley I wanted to know what belt I would need or better yet what size. Thanks in advance.

Hey guys I have a quick question I'm going to change out my transmission fluid to Royal Purple Synchromax in my 2006 Mustang GT stick shift with a Kenne Bell 2.6 putting down 500rwhp, but I wanted to know how many quarts does it take? 1). How many quarts does it take? 2). I'm doing a clutch...

Hey fella's I have a quick question I have a 06 Mustang Gt with a Kenne Bell 2.6 which dynoed at 498 to the rear I'm currently riding on 295/35/20 by 10 on the rear and 255/30/20 on the front I was just wondering what quarter mile times I could be looking at with this setup. I don't get to the...

:mj::mj::mj::mj::mj: I swear I truly believe someone at Ford must have a thing for practical jokes because for the life of me I can not get the d#$# stock door handle off. I already took the cable off the spring out but I cant get it to release from the studs. So can anyone help me with this...