I am in Calif as well, original owner 2003 cobra. Still on stock tune, just have cold air intake and exhaust, after reading this no plans to modify further.
a friend is looking at 2 used cobras, one is owned by an older guy still has stock tune, records of oil changes and stock pulley but does have a cold air, shifter, mid pipe and catback, well maintained looks and drives like new but has around 60k miles. My friend said the other cobra has a...
I have an 03 cobra with mrt catted hpipe, mag catback and K and N fipk, just wondering how it would do against an 03 saleen that I think came with the m90 Eaton? There is a guy that wants to race but I am thinking I might need at least a pulley and tune with the weight disadvantage as I still...
just wondering if anyone knows if installing a whipple supercharger on an 03 cobra will cause a visual smog check failure in california? I have a 2000 f150 that is completely stock but had a section cut out of the stock plastic airbox and they failed me on the visual, of course this was the...
Hi I have a 91 mustang notchback with a 351w with all the smog equipment as well as a high flow catted pipe. Just wondering if this will pass calif smog, passed fine in Nevada, thanks.
I have a 2000 f150 supercab with the 5.4 and will be doing some towing. I tried to see if it has a factory tow package, it has a class 3 hitch and a connector about 5 inches to the right of it. The connector has a cap and looks like it accepts a round connector. Also I am thinking of...
I am moving from Nevada to California and have an 03 cobra. Still has stock tune and pulley but aftermarket catted hpipe and catback as well as a cold air kit, should this pass calif smog ok? Also does calif require a front license plate and if so any way to mount it on to the bumber without...
this seems like a pretty big blower for a daily driver, just wondering if running 13 lbs with the wipple 3.4 can you still use the stock fuel system and any estimate on power with cold air, high flow catted h pipe, and catback.
thanks.
Just wondering if anyone could provide details on how to replace the inner belt that goes arount the water pump, 03 cobra? I did a search but only found replacement of the supercharger belt which takes just a few minutes. I have the stock pulley set up, thanks!
I have an 03 cobra that is going off of warranty in a few months, 64k miles and I drive it about 25 miles a day. Just wondering if a chip and pulley would effect gas mileage when driven easy and are there too many miles on the motor now, seems to run just like new. Also I would get the heat...
I have oil leaking from the back of the engine where the trans attatches. The motor is stock but has 61k miles (03 terminator). I can not tell exactly where it is comming from but just wondering if the oil pan gasket or rear main seal could be bad and if it is difficult to replace it?
thanks
I just purchased 4 FR500 black rims 17x9 and 17x10.5 used for a good price. All of the rims have nitto drag radials, even the front. The wheels and tires fit good (no IRS bolt inteference) but I am wondering if it is safe to run drag radials on the front?
It is pretty dry out here, Las Vegas...
I was just wondering if anyone has been running more than 550hp for a long time and not had any engine problems? I read in MMFF (an article by a mod motor expert) stated that the 03-04 cobra motors are good up to about 550 hp (for motor longevity). If that is the case maybe a stock ported...
This is a used steeda triax shifter, like new condition with a pro 5 handle for the T56 03/04 cobra.
currently on EBAY at
http://cgi.ebay.com/ebaymotors/steeda-triax-shifter-03-cobra-04-cobra_W0QQcmdZViewItemQQcategoryZ33736QQihZ007QQitemZ170178787751QQrdZ1QQsspagenameZWDVW
. PM for...
Hi, I have heard the best shifter is the mgw but I have a triax and pro 5.0, just wondering what is the best between the pro 5.0 and steeda triax? I have the triax on the car but might switch it out. Thanks?
Hi I am thinking of just using a 6lb lower pulley on an 03 with the stock Eaton. Do you have to change any other pulleys like the alternator pulley. Also any ideas what power I should have with a tune and 6lb lower, currently has mrt catted hpipe, magnaflow catback and CAI, stock non ported eaton.
Hi I have an 03 cobra with 10.5 inch rims on the back, currently have 295s on it but I found a deal on 335s just wondering if anyone knows if they would fit?
thanks.
I checked with my local dealer (1 in stock), still want 20k over MSRP, just wondering if anyone knows when they will go for MSRP, possibly another year.
I am the original owner of an 03 cobra, now with 46k miles. It still does not seem to use any oil and just wondering when they typically do (at what mileage)?
Just wondering if advertised times for the gt500 are lower than they should be since 0-60 times for stock term and gt500 are listed as the same4.5 sec. The gt500 has a lower pound per horse power rating.
I have the premium warranty with 0 ded, just wondering if anyone knows if this covers a rental if the dealer keeps your car overnight, sure hope so as the warranty was expensive.
just wondering if this is a good deal, 4 afr cobra satin replica rims with center caps 18x9 and 18.10.5 with 2 kumo mx 295/35/18s with about 80% tread, but no tires for the front, 500.