I've been contemplating doing an Eaton swap on my '04 Lincoln Aviator. I'm not looking for anything crazy power-wise, just enough for it to get out of it's own way.
Obviously I'll need to change other things first, swap out the clutch fan for an electric, install a hydroboost setup, upgrade...
So I recently, received my custom ordered aftermarket '02 Cobra fascia. This will be go onto my '03 Cobra soon.
Today I attempted a test fit, but it seems that in order for the fascia to mount correctly and have the "'roo lights" fit, I'll have to remove the foam bumper support.
My question...
All prices shown are shipping included.
Amber tails - SOLD
The previous owner made "repair attempt" on a mounting post, I'll be cleaning it up.
Clear GT fogs, NIB, bulbs included - $30
'01 DHG Bullitt sail panels w/ glass and weather stripping - SOLD...
I have the opportunity to pick up a lightly damaged '01 Cobra fascia from a co-worker.
He only wants a replacement "Mach1 fascia" in exchange.
Prepainted urethane GT fascia - $285
Fog lights and brackets - $28
Chin spoiler - $50
Total = $363. . . not bad for an '01 fascia.
Here's...
Picking up an '02 Cougar for a DD and would like to do this simple mod. If you've got the following parts:
SVT Contour Upper Intake Manifold
SVTC Throttle body
SVTC Throttle cable and bracket
PM me with prices. Thanks.
my sister has an SVTF that the clutch has gone out on. it was the stock unit so the whole assembly has to be replaced. its just a DD so she doesn't want anything extreme.
will this do...
I don't know if I've ever seen a write up on how to do this, if so I apologize. It seemed simple enough.
Step 1. Remove your taillights and harnesses. (If, you've got a set of '99/'01 tails I assume you know how to do this part, so I didn't take pics.) In case you don't, you need to...
The VMP 2.3TVS is the blower I'll be replacing my Heaton with. With a pulley set up to hit about 600rwhp. My question is:
What as far as my fueling system will need an upgrade?
I was thinking a new hat to hold dual FGT pumps and 60lb injectors.
Will I also need a new rails and...
Will the Eaton from a '03-'04 Cobra mount up to the lower intake on a Lightning?
My little brother found a good deal on a L engine minus the blower. Which is ok seeing as he plans to swap it with into his' 99 GT. I've done a bit of searching but haven't found a definitive answer to give him...
Sold my '98 and I'll be purchasing a pullied '03 Cobra within the next week or so. The car is currently in Oceanside, California and I live in Riverton, Wyoming. This means an altitude change from <100ft (~14.7atm psi) to >5000ft (<12.2atm psi). I know I'll make less power due to the thinner...
I'm going to be selling my '98 Cobra that i was going to do an Eaton swap on, and will be purchasing an '03 Termi. So I have no further need for these. I'm only asking for what I paid for the items. Hopefully one or more of you can put these to use better than I can.
'03 Cobra rod&piston set...
I had to change out my T-45's pilot bearing a little while back and while I was under there I noticed my Cobra's motor mounts are pretty well thrashed. I know there a few different kinds I can choose from to replace the old ones. My question is are there any that are better than others or I...
I just reinstalled an A/C system on my '98 and thusly have the delete/bypass pulley to sell. It's just sitting on top of my tool box and I'd like it gone.
It's the same FRPP from AmericanMuscle for $45 new.
$25 shipped.
When I bought my Cobra the previous owner had done an A/C delete. This morning I just installed another A/C setup and now that its all in again, how much R-134a would a completely empty system require to fill?
I'm looking to see if anyone is up for a trade of my set of 4 18x9" chrome '95 Cobra R style wheels for a set of 4 chrome '03/'04 Cobra wheels. Mine currently have 255/35/18 Nitto NT555's with less than 10k miles of wear all around.
(Not sure i should post this in the Termi parts...
My original plan was to swap the B-heads and intake for a set of '04 Aviator heads (retaining my B-head intake cams) and an '01 Cobra intake manifold (which I'll still do, for the time being).
Here's where my question come in. Would it be more worth while to build my Teksid (bore & stroke to...
So, Ive pretty much decided on how my build is going to go.
Step 1. rebuild engine. Staying 4.6L
-Forged Rods and pistons (-4cc dish) = 10.42:1 Compression Ratio
-Swapping on '04 Heads and '01 Cobra intake
Step 2. Suspension
-Griggs GR40 Street System
Step 3. Boost
-Termi...
I've been on the search for a throttle bracket for the '01 Cobra intake I picked up for my H/C/I swap I'm doing on my '98.
a) If one of you have on I can buy from you please PM me and I'll send payment immediately.
b) Maybe one of you can take of the bracket for a few minutes and take some...
Purchased an '01 Cobra intake manifold for my '04 head swap but the intake I received did not have the throttle bracket attached. I will take any one as long as it'll fit. Any off of the following will work:
'99 Cobra
'01 Cobra
'03 Mach 1
'04 Mach 1
'03 Marauder
'04 Marauder
I've begun piecing together my heads and intake swap. Just got in my '01 Cobra intake manifold . . .
. . . and yeah I'm going to clean it.
Here's one quick question... (I'm sure there will be more)
When swapping out the B-heads to later DOHC heads, like the '04 Aviator's I'm planning...
The listed items were purchased for my '96 V6, which I'm currently in the process of selling. These have never been installed and are for all intensive purposes are Brand New. The Pacesetter H-pipe adapter was originally purchased for $99 from AmericanMuscle and the Thrush Welded Series 2.250"...
I've seen swaps like this popping up with a little more frequency lately. I'm asking on behalf of my little brother (he doesn't have an acct on here yet). If this thread needs to be moved feel free to do so.
He currently has a '99 GT coupe that he's looking to build up. For now it's on the...