Search results

This is a Posi race ported eaton number 294 off of a 03/04 cobra. You will receive the upper only with a 2.76 pulley ( lower and intercooler not included) polished larger aftermarket blower inlet with the stock throttlebody and factory intake system including the cobra 90mm MAF with aftermarket...

These injectors were on my car for less then 200 miles. I went to larger injectors to go with my KB 2.8. I want $285 shipped. Pm call or text Tony 954 638 8914.

Just as the title says I'm looking to upgrade my Posi Ported Eaton to something bigger. If I had my choice I would like a KB or TVS but I'm open to anything but I'm in a rush because my motor will be complete by Monday or Tuesday will go back in the car by the end of next week. I'm looking for...

I purchaised these pumps to put in my 01 cobra but I ended up picking up a pair of new supercar pumps instead. I picked these up from another member on here, I was told they had roughly 1000 miles on them. I have one pump left I want $55 shipped for it. PM, call or text. Tony 954 638 8914. ( you...

I purchaised these pumps to put in my 01 cobra but I ended up picking up a pair of new supercar pumps instead. I picked these up from another member on here, I was told they had roughly 1000 miles on them. I'm looking to get what I paid for them witch is $100 shipped for both. I'm not looking to...

I purchaised a pair of focus pumps for my cobra off here, but I only got the pumps with out pigtails. I'm in need of two of them. If anyone has 2 there willing to sell or if you can tell me where I can buy them from please let me know. You can PM, call or text me. Tony 954 638 8914.

I ran this sensor for only a few weeks, maybe 100 miles, in my procharged 01 cobra. I have since sold the Procharger kit and gone with a Posi eaton swap. I'm no longer gonna be running in a blow through set up and I'm running in draw through now so I would like to switch to a ba3000. I'm looking...

I ran this sensor for only a few weeks, maybe 100 miles, in my procharged 01 cobra. I have since sold the Procharger kit and gone with a Posi eaton swap. I'm no longer gonna be running in a blow through set up and I'm running in draw through now so I would like to switch to a ba3000. I'm looking...

This was removed from my 01 cobra with 40k miles when I did my eaton swap. It is in great shape and comes with all 3 pieces. Is interested PM call or text tony if interested 954 638 8914. I'm looking for $85 shipped.

I just completed my eaton swap on my 01 Cobra. The last piece of the build I need is a cold air intake for it. I'm gonna be running a HPX slot sensor so I would perfer some form of intake setup that I could utilize my existing sensor. If you got something that will work for me shoot me a text or...

Just before I'm ready to drop the motor back in as I'm installing the accessories I run into another problem witch is the oil filter housing witch is from the stock 01 cobra. Apparently you can't use the housing from the 01 because the radiator outlet is in the way of mounting the alternator (as...

Here are the facts, I'm using the stock 01 cobra block ( completely built of coarse) I have a brand new 03 cobra water pump (purchaised from advanced auto parts part # t4206) and I'm using the stock 01 cobra water pump pulley. As you can see from the picture the pulley is sitting way too far...

I'm finishing up my eaton swapped 01 cobra build.I had a valve job done on my heads and when the machine shop gave me my heads back they told me I needed to replace the lash adjusters cause they were all bad. Now I'm not an idiot so I know my motor had only 48k miles on it and also the chances...

This computer was removed from my 48k mile 01 cobra. This computer is stock and works perfectly. The only reason it was removed was to replace it with a different computer / computer code for tuning purposes. I want $175 shipped. PM, call or text Tony 954 638 8914.

These rods and pistons were removed from a 01 cobra with 48,000 miles. The motor had a spun rod bearing so I would recomend honing the rods. The pistons are standard bore flat top pistons. I'm not interested in selling them separate I just want $60 for the set plus shipping they will fit in a...

I'm looking for either a aftermarket or new factory screw in cross over plug. I was lucky enough to get my factory plug out but I wouldn't dare attempt to try to reinstall it for obvious reasons. Let me know what you have available. Pm, call or text Tony 954 638 8914 for a faster response...

I have a fuel rail for sale that came off a 98 cobra. One of the mounting tabs was cut off but I have a factory tab that can be welded back on. The rail is in good shape and comes with the regulator. If interested call, text or Pm Tony 954 638 8914 if your interested. Asking $65 shipped.

As the title states I have a factory 01 cobra aluminum block I'm looking to purchase a set of used head studs. I would like a set of ARP's that are in good shape and aren't missing any nuts or washers. You can PM , call or text Tony with what you have available. 954 638 8914

Up for sale are two 2.5" qtp motorized electronic exhaust cutouts. These are in perfect working condition. They measure approximately 10" long. If interested call or text or PM Tony 954 638 8914. I will only sell then as a pair these retail for around $300 each so my price is firm at $215...

These are a set of v-band HP performance headers. These are just the headers. These would be a great start for a custom single or twin turbo kit. These headers were part of a twin turbo kit that was parted out so please don't ask because I have no other parts of the kit left. I'm looking to get...

I'm selling the complete egr setup off my 48k mile 01 cobra. Comes with everything pictured tube, sensor, valve and vaccuum lines. $55 shipped in a medium flat rate box. If interested call, text or pm tony 954-638-8914.

I'm looking for a zmr2 computer. Long story short I have the sct pro racer software witch I have ability to tune on a few different codes. Since I recently purchased a 01 cobra with a mse3 computer I am not able to tune it without paying $300 to have the new code unlocked. So I am looking to...

I had this alternator installed on my 2001 cobra for less then a week (maybe at most 10 miles on it). It was removed to do my eaton swap. This is a 200amp alternator so it is recommended to upgrade to a larger power wire. I want $135 shipped. If interested call text or PM tony 954-638-8914.

I am selling a pair of hp twin turbo headers for a 2v gt. This includes only the headers the mid pipes have been sold. I'm willing to sell them to the best offer I get. These headers are perfect for any custom twin or single turbo kit. As you can see in the pictures the headers use a v-band...

I have a 01 cobra. What I'm looking for is someone local (shipping would be horrendous ) that will be interested in doing a swap with me for a HP twin 70mm turbo kit. The kit has dual tial 38mm wastegates dual blow off valves. This kit will make big horsepower. I will include everything a 03 04...