Search results

From what I understand, the GEN 3 factory heads flow better then all the other factory heads. I also understand they have direct injector ports on them. My question is do they sell kits that will allow you to retro fit the gen 1 and gen 2 blocks or is there another reason why they will not work...

ISO 88mm VMP supercharger pulley. Really don't want to buy new if I don't have to. Please let me know what you have. I may also be interested in trading an 82mm 6-rib VMP pulley as well. Let me know.

So between Lund, AED, and PBD which would you go with if you have a supercharger on your car?

Good Morning, I have went round and round with trying to decide what fuel system I want for my car. It's a 2013 Mustang GT with Gen 2 stock block, LT headers, 3"catted midpipe, Gen 1 heads and cams, VMP Gen3R with currently an 82mm pulley, FIC 1000 injectors , OPG, crank sprocket that is...

.028 is the gap. Also can someone tell me the length for the belt on the passenger side of a 2013 Mustang GT with a GEN3R blower with 88mm pulley? One suggestion was K060825 one was K060806. Let me know that as well. Done some data logging and noted that according to a friend of mine (Who is...

Yes I used the NGK 6510. I'm not sure what could be the issue. I replaced the coil and plug and the code returned so definitely continue to provide any suggestions.

I will have to check for leaks. But sounds like the condition is coming from being lean? Am I understanding that correctly?

Interesting I looked at mine and I could actually remove both bolts without issue. They only thing I would have had to do was bend a 10mm wrench for the inner bolt but would clear without issue. Interesting.

Hello again fam The GEN3R is installed. Excited about that, but have some codes showing up surrounding misfires. The codes are as follows: P0300, P0302,P0304, P0316, P0507, P2195, P2197. The last two are O2 sensor stuff. If anyone has any thoughts or suggestions please share them. Also full...

Chuck and the VMP staff had restored my faith. My issue isn't quite resolved....but they have responded anytime I have had questions. I understand playing phone tech most of the time don't help. I have used videos and photos and we are still coming up short. The point is they have continued to...

Just as I posted my concerns I wanted to come back and say Chuck was very quick to respond and take the situation and handle it accordingly. Chuck @ VMP Performance done a great job communicating with me about what the issue was and what he needed to do to get it resolved. He not only was able...

Thank you for that. The point is why did it have to get to this point??? Note I did not say anything regarding my experience because I wanted to provide a fair opportunity to get it resolved, but I also felt the matter was not being taken seriously.

Like I stated earlier I really hope they take the opportunity to do right by a customer who invested quite a bit. I understand the pandemic has impacted production as well as every other stair step process in the US but customer service is something that is free and doesn't require a price tag...

Before I provide my story I'm going to allow them an opportunity to fix the issue. I want to know if this type of customer interaction is standard or one in a hundred. Based off some of the responses outside of here....I'm very shocked and surprised. After a short amount of time I will be forced...

Hello Mustang Community I would like to get some feedback on service after the sale concerning VMP performance and see if I am possibly an outliner and not the normal.

PM me some photos please sir. I think it is I just can't confirm that. Based solely off looking at a performance website its the same. They say its from 2011-2017 Mustang GT

Searching for a new slave cylinder for my 2013 Mustang GT. Has to be a genuine ford part. Ready to buy. Anyone knows of where or possibly have access to one hit me up asap!!!!! Thanks.

I am in the process of replacing the clutch in my 2013 Mustang GT with a RST twin disc while waiting for my GEN3R to be shipped!!! Been about 2 months waiting lol. Anyway, I am having trouble finding a ford throw out bearing for it. According to what I have been told one from a GT500 (Part...

I appreciate any advice provided as you will note in my comment, however, I do not appreciate sarcasm which is what I clearly addressed with respect. You as the moderator should have noted that. Provide the advice and leave the sarcasm off. I do not spend hours on a forum sir. As the moderator...

Thank you for your input. However, if you note I have been here multiple years before you. Also if you are not the seller keep your sarcasm to yourself sir, thanks. If the seller of these is interested in selling them please reach out.

Can you give a lil more detail about why you hated it for daily driving or cruising please? Mantics cost that much? First supercharged car I ever had so I want to ensure it will not only be durable but also enjoy driving it as well.

How was your pedal feel?

Hello ladies and gents I have a 2013 Mustang GT that will be receiving a VMP Gen3R shortly. I understand that along with the tranny being a weak point the clutch is definitely a major player in the weakness area as well. I have being looking at different clutches and idea surrounding a clutch...

I heard a rumor from a youtube video of someone getting a blower put on. The tuner made a mention of he heard that the 2013 Mustang GT received the connecting rods from the 2012 Boss 302? Can anyone confirm or shoot that rumor down? Will be getting a VMP GEN3R soon and I want to know if the rods...

Are these still available? Also I see the sign of 2007 Mustang GT but the description says they are 2013-14 seats. Can you give me some more detail about them. I have a 2013 Mustang GT so my interest is picked.