MMR had one for B heads but it is pricey(as usual) and built for high RPM. Haven't looked to see if they still sell them. It's a sheet metal intake. Almost bought a used one but no good for the street. Hence the reason the guy wanted to dump it.
Du
Ran stock slot in a blow thru in 3.5" pipe and ran out at 6000rpm 400ish to the tire. Switched to ProM in a 4" draw thru. Good resolution and still room to grow. The excel book they gave me to get it going was OK.
Sent from my SM-T807R4 using the svtperformance.com mobile app
I have an oversize crank pulley and 3.6 pulley on my Paxton 1500. 11ish psi at 6500 on good air... no intercooler. When you do your build you are going to upgrade you balancer/crank pulley anyway right? Few dollars more...
Sent from my SM-T807R4 using the svtperformance.com mobile app
Remove lower hose and thermostat assembly from radiator, block and crossover tube. Cut the little hose that goes to the degas tank flush at the old lower hose and leave hooked up to the degas tank. Get the lower hose from the 96 GT with the 2v. It will have a little hose for the degas bottle...
Valvoline full synthetic 10w30. In my old hydraulic flat tappet I ran rotella T5 10w30 for the higher zinc levels for the cam wear.
Sent from my iPhone using the svtperformance.com mobile app
Ignore the discharge tube setup... it didn't work as hoped and changed it to a draw though and recirculating valve. The tuner thought it would be ok with the maf. Well, it wasn't...
Sent from my iPhone using the svtperformance.com mobile app
This is my 98 Mark VIII with 96-98 cobra intake and Paxton 1500. I pieced the kit together and refused to pay full price at the time for the proper crossover tube. I got crossover delete kit from On3 Performance. You have to grind the hold downs for the fittings to get them to clear. C heads may...
Like the title says... I really only want the pipe and boot off the TB to mod for my SC setup. It's actually for my 98 Mark VIII.... please don't hold that against me!
Du
Not sure what these are worth used...How about $250 shipped to your door?
I have some various couplers and clamps(hose clamp style)that aren't worth a picture (can only post 5 anyway) I will throw in.
If you don't like,the color I have a glass bead cabinet and can strip for you.
Du...