Search results

I talked to two different tuners and both said they could use the Xcal 2. Worst case I’ll buy new, just trying to avoid that if possible.

I am hoping someone can help me out with a download for software needed for the XCal 2. I’ve had this tuner married to my car since 2006 and recently Procharged it, so I need a way to get my tune loaded into the Xcal 2. If anyone has the software they can host for download, I would be forever...

Hey guys. Been working on tuning my twin turbo cobra and hoping to get a little feedback on these plugs. NGK BR7EF’s, e85, 15psi and 17 degrees timing. #8 seems to be much cleaner than the rest. I’m still educating myself on reading E85 plugs, so I’m not quite sure what to think of these...

I’m thinking it may actually be something with the downpipes. I opened the cutouts and now I’m not hearing the noise. It may be because it’s just too loud now to hear it. Here is a clip for another set of ears to hear. Open exhaust

No, exhaust goes from the turbos straight to a Bassani cat-back with nothing in between.

Hoping I can get some new ears on this noise to send me in another direction. My Cobra is TH400 swapped and has been making this noise for 2 years. It has a new SFI flexplate and new ARP hardware for both flexplate to crank and converter to flexplate. This noise has been the same the whole time...

I actually want the lope. It’s a twin turbo car so exhaust is slightly quieter than a N/A car and I’d like to have some aggressiveness to it.

Anyone running a MS3Pro or other stand-alone ECU care to share their timing maps? I’m more interested in the idle area. I have some decent cams in my car and am having trouble getting the lope out of them. Thanks in advance!

Appreciate the feedback. No, they are smooth, guess I was just worried they weren’t getting enough oil with the markings on the lobes.

Doing some maintenance on the car and took off the passenger valve cover due to some noises at idle I’m trying to chase down. Does the lobe wear on these comp cams look normal? Looks pretty even across the board but wanted a second opinion.

Hey guys, I am at my whits end with this noise and hoping some new sets of ears can help. This has been going on for over a year and nothing I do changes it. This is on a 4.6 DOHC twin turbo with a TH400 behind it. -New flexplate properly torqued with ARP bolts -Flushed and replaced...

Appreciate the insight. I will give it a try this week and see how it works out.

No MAF. Wasn’t sure if I could use that since it says that one is defaulted to MAF even though I’m not running one. So I could use Analog 1 as signal, 5v ref for power and then sensor ground? Or do I externally power and ground?

That’s my plan. I really just want to be able to see actual pressure and not add another gauge inside the car. All of my digital in inputs are taken with transbrake, bump and flex. Digital in 4 doesn't show up as an option in tunerstudio for some reason.

Anyone have any idea what input to use on the auxiliary I/O harness to add a 3 wire oil pressure sensor? Or if there is a better way to log actual oil pressure within Tunerstudio?

Mine is a custom made hat that was made to function and look just like the old Fore hats. This one was made to accept an external pump…basically a sump system but from the top instead of the bottom of the tank. I don’t like the set up and it leaks, so I’m going with a Division X dual pump...

It looks tight, but I may have found another issue that may be causing this. The fuel hat is custom made as he decided to go with an external pump that pulled from the top (I feel like this is a bad idea). This is just a flat stock of billet with a couple fittings coming out of it, but looking...

Hey guys. I think I already know the answer to this but wanted a second opinion. I have a leak at the fuel hat only when the tank is completely full. It comes out around the seal which I have replaced with no change in leakage. I pulled the tank yesterday and noticed the previous owner seems...

What is your timing at idle? Mine idles really smooth but seems really rich. The car barely even sounds cammed, which I know I’d rather have it idle smooth over hearing the lope, but some lope would be nice.

I appreciate the feedback. I'm running speed density.

Anyone familiar with the MS3Pro and Tunerstudio? I am just getting my feet wet with the new ECU in the car and hoping to pick the brains of those with more knowledge than me. If you could take a look at these tables and let me know what changes should be made, that would be greatly...

hey man, text me when you see this if you still have the insulator. 419-376-3632

My ABS light is on and after running a scanner on the car, it says “U1262 SCP Data Link Fault”. I also had codes for both rear sensors, so I replaced those, cleared the code, but this U1262 comes right back when the key is turned on. I sent my ABS module out for repair assuming that was the...

I see you have the MS3pro. I have the same standalone and have an issue with my ABS light on for a data link fault. Did you have any issues with your factory ABS working after install of the new ECU?

If you were a little closer I would be all about it. Thanks anyway!