113k on body 4k on rebuild of car
This car has a salvage CT title . Please Read Below
Engine
Built motor and balanced rotating assembly. 4k on motor since rebuild. Teksid aluminum block, forged cobra crank, Manley pistons and rods. Heads rebuilt with new valves and seals & valve job. All new...
2001 SVT Cobra
59k original Miles
Clean Title in hand
2 Owners
$12,800
Selling my 2001 cobra to fund another project. This is a clean car that can be daily driven. Basically Car is all stock mechanically beside a aftermarket exhaust, shifter and 2004 cobra suspension which I put on last...
Hey guys im looking for a pair of 2003/2004 cobra Coupe uncut Rear Springs shipped to Ct 06776 . Let me know what you have mileage & price . If you have the fronts and rears and dont want to split the set up i may take all 4 if the price is right .
I currently purchased a low milage 01 cobra and want to switch my built engine, ecu , cluster and turbo kit from my 99 cobra to the 01 cobra . My car was tuned and im trying to save a little bit of money on getting it retuned.. Can i switch just ecu and cluster over to my 01? or do i have to...
I have a red & black 1999 Mustang Cobra Coupe that I am parting out bc of damage to pass side door and pass lower fender.. I purchased a low mileage 2001 cobra to swap my built motor into so I will be selling some parts off of the 2001 as well . Both cars are low mileage and garaged . Parts are...
Forsale is a set of 2001 cobra tailights and harness . I took these off to run tinted tailights . The cobra has about 50k on the odometer . Excellent condition ..$475 shipped
Posted from another site
FYI: This should be huge and a great cause too!
On Saturday, April 13, one of the biggest “Show and Shine” car-and-bike-and-truck shows in New England is coming to Lime Rock Park. It is a first-time event, and it’s one of the largest efforts to benefit victims and...
Reposted from another site :
FYI: This should be huge and a great cause too!
On Saturday, April 13, one of the biggest “Show and Shine” car-and-bike-and-truck shows in New England is coming to Lime Rock Park. It is a first-time event, and it’s one of the largest efforts to benefit victims...
Whos a good tuner in Ct area ? Ive always used Chris @ EFI logics but since he passed away last summer so did tuning on fords . Any ideas ?
I know Dez in MA is good or Mustang Magic but i was looking for someone in ct .
Can you eliminate the hose that runs from the Coolant crossover down to the thermostat housing . When i installed my turbo i had to run a flex radiator hose down to the thermostat housing but its pretty tight in there and its a mess and sometimes leaks. Is there any way to eliminate that hose...
Im looking into doing some detailing on my 99 cobra .. I have used rotary buffers at the body shop i work at but was thinking about buying a Porter and cable 7424xp polisher for home and from the reviews and the info i have been reading it seems like a perfect choice .
My cobra is black/ rio...
Im looking to buy a used T-56 out of a 03/04 cobra to put in my Fox . If anyone has one for sale or knows of one anywhere pm me . I have cash waiting
thanx in advance
I know our stock throttle body flows 1089cfm. At what point or hp is it a restriction?. Im running a 70mm turbo and a 03 mach intake and shooting for 550-600hp after this winter. Should i be looking into another throttle body such as accufab or is it not worth it ?
Stock dual 57mm - 1089 cfm...
I recently added a 70mm turbo and a 03/04 tank & pumps w/60lb injectors to my 99 cobra. This brought me to 455hp at 6-7psi before the 03 pumps were maxed. Im going to add a BAP and a wire upgrade hopefully i can see 550-600hp . My question is at what hp do the stock lines and rails become a issue?
My cobra has a slight hesitation/bucking at 1500-2100 rpm at part throttle. I had the problem for a while and i figured i would just deal w/ it b/c i was adding a turbo .. Now that i added the turbo and a assortment of parts its still there even after it was tuned. Its real bad when the car isnt...
I just had my Heads and engine rebuilt 9.2:1 comp manley pistons and rods after i broke a ring land on my stock motor. I have a single MP T70 turbo ..
I have this weird problem where at WOT at about 5-6000 rpm in 4th gear i get this smoke screen out the tail pipes when im driving and let off...
Im new to this whole turbo scene but i do know one part you want right is the fuel system : My turbo 99 has a single 70mm turbo 60lb injectors and 03/04 tank and pumps. I know stock pumps make about 450ish .. If i add a BAP can it make 600-650 w/ stock pumps?
What is the limit for stock...
I have a bad idler pulley and i was curious if anyone made nice idler pulleys for our cars.. I know the 03/04 crowd has them just ddint know if they made them for ours.
Forsale is a 99-01 cobra JLT intake CAI. Has about 2k miles on it . Put a turbo on and no longer need it . Everything in great condition.
150.00 shipped
What damper should i use when i have my rotating assembly re-balanced? I have a March sfi damper and the stock cobra. My engine builder said either one since he will balance everything . I have read the sticky about dampers but i dont want to spin the motor past 6800-7 so the stock one sounds to...
Just got done tearing apart my motor due to a cracked #7 piston and i am going to slap a set of forged pistons and rods in it , have it rebalanced and have the heads re-done. When we took the heads off we checked what the cams were set at :
122 intake lobe center
110 exhaust lobe center...
Im in the process of tearing down my engine w/ My engine builder who i trust b/c he is a family friend .. We were talking the other day about when he goes to balance 302 /351 based rotating assembly he said that at his shop they usually balance the flywheel , clutch and damper together w/ the...