Search results

I am going a different direction and looking to sell these rear brake parts. All of it is brand new unused and never mounted. Rear EBC rotors in black GD7154 Stifflers Rear Stainless brake line kit in clear Hawk Ceramic Pads 301Z630 BGRacing ground calipers(comes with a second set of...

looking for a black keypad door handle.

These injectors were installed in my truck and received dyno time and maybe 15miles street use and I found the shop tuning my truck was incompetent and couldn't tune the injectors after they were sent to RC and checked for any problems. So what I have is a set of 8 RC Engineering 750cc injectors...

1 set of 8 new Siemens 60lb injectors. 315.00 shipped and includes paypal fees. -----SOLD------

stiegemeier stage 3 ported blower with powerfin and stripped rotors. fully ported and port matched plenum. Less then 10k miles on the blower itself. 2.93 upper. The blower is for 01+ but will fit 99-00 if you drill the 2 additional holes.. It is a 04 blower core. money order...

42lb injectors 30k miles $200shipped SOLD!

stiegmeir stage 3 ported blower with powerfin and stripped rotors. fully ported and port matched plenum not done by stieg. Less then 10k miles on the blower. 2.93 upper. $800 shipped money order, cashiers check, personal check or paypal+3% fees.

Lower intake manifold only. no injectors or rails. $350 shipped. money order, cashiers check, personal check or paypal+3% fees.

genuine Factory Tech 2CR valve body. 200 shipped. custom valve body. it started out life as a 2CR from factory tech but it shifted soft as ever and Tim wouldn't give me a refund on it. It had less then 20 miles on it so I bought new valves, springs and modulator from sonnax and built my...

anyone have a copy of the afco pro series heat exchanger directions. There weren't any in the box and I think there are some nuts/bolts missing. Just want to be sure I have everything.

stock 42lb injectors 30k miles $200shipped solid 4lb lower. I might have a belt for this also. $75 shipped polished aem intake with dryflow filter minus heat shield needs some polishing. $100 shipped stieg stage 3 ported blower with powerfin and stripped rotors. fully ported and port...

This is for anyone who has one installed. I am looking for a measurement on the 3.4 so I can finish an intake before the new motor goes in. I am looking for the distance from drivers side fender to the lip of the TB closest to the blower. Basically the outside edge of the silicone coupler used...

Does anyone know the HP limits of the dual 255 intank pump setup? What are you 3.4 whipple guys running?

I figured I would post some pics of the power steering relocation I did today. I used the 4R3Z3A697AA 05+ mustang reservoir which has side barbs on it versus the bottom on the stocker and it has a nice mounting tab on it. I did this to make room for the new valve covers. It fit nicely on one of...

anyone know what the cause/fix is for this. I tried clearing it with the xcal2 but it comes back right away.

I am looking for a porter cable kit. Every place from tropi-care to adams and more all have a kit with the porter cable polisher and their own various pads. Is there one that has better pads than the other or are they all the same. Just looking for recommendations on which to get or look into.

Anyone on here running a Gords heat exchanger? Just looking for someone who has one and their thoughts on it overall. I posted this on nloc and figured I would ask here also.

set of 8 accel super coils. I had them in for the last 5 months. They have about 1000 miles on them. I am just looking to get rid of the yellow. They are in perfect shape and work great. I have had no problems with them at all up to the 16psi I run. $165 shipped anywhere. They are $240shipped...

I have a set of 8 Accel Super Coils. I have had them in for the last 5 months. They have about 1000 miles on them. I am just looking to get rid of the yellow. Will end up getting msd or the weaponx coils. They are in perfect shape and working perfect.I have had no problems with them at all up to...

Does anyone know if they changed the fuse holder again? I just got the 270 kit direct from FAL and the fuse holder doesn't look like either of the ones in this thread. http://svtperformance.com/forums/showthread.php?t=351641&highlight=flex+lite Here is the one I got. It's huge and has a clear...

Looking for a copy of the directions for the AMW catch can. Would any of you that have it be able to email me a copy?

What would be the cause of the converter locking too early? It is locking up at about 31-32mph recently. Is it a sign of the converter going out?

ran across this when searching for the AMW catch can which is now no longer available. http://www.ls2gto.com/forums/showthread.php?t=98915

I searched but can't tell from the pictures. I seemed to have an extra black vac line when doing the EGR delete. I removed one black that went behind the battery in a T, one red which went to the upper plenum, green from the egr and the pink that was on the boost actuator and went to the T in...

Anyone have a problem with those gray bed rail caps lifting up? I noticed on my drivers side it is lifting up and won't stay down. Looks like it's held in with tabs that are no longer working. It's right by the cab where it is coming up. Need to buy a new one i'm guessing. Also anyone got a...