I am considering selling my 93, it has 135k miles on it, basically stock other than long bars, Hughes converter, 1.72 rockers, cold air intake, MSD coil, cowl hood, roll pan, clear tail lights, and back window has been replaced with a solid window(window was by previous owner) truck runs and...
I have a brand new 434 shortblock built by Kuntz & CO. this summer. It is a RPM MAXX 4 bolt main block( identical to Dart), RPM 4340 h beam rods, RPM 4340 crank. JE flat top pistons fly cut for TFS 2 heads. Calico coated rod/main bearings. Custom grind Comp solid roller cam, 723 lift, Moroso oil...
I have a 2002 navigator block with mod max rods and rings, manley 18cc pistons, stock forged crank, calico coated rod/main bearings, all arp bolts and studs, felpro gaskets, felpro mls head gaskets, 2002 lightning heads, cams, and comp cams springs meizere electric wawer pump and relay, and mmr...
I have a 2002 navigator block with mod max rods and rings, manley 18cc pistons, stock forged crank, calico coated rod/main bearings, all arp bolts and studs, felpro gaskets, felpro mls head gaskets, 2002 lightning heads, cams, and comp cams springs meizere electric wawer pump and relay, and mmr...
I have a T45 Tremec out of my 00 GT with 80k miles on it with a Hurst billet plus shifter. Also comes with(ALL NEW PARTS!!) a Centerforce dual friction clutch set, Ram aluminum flywheel, ARP flywheel and pressure plate bolts, UPR fire wall adjuster and quadrant, and FRPP adjustable cable. Again...
I am wanting to sell the 5.4 I built for my Mustang. It is going to cost me more than I thought to put it in my car. this is a brand new motor that has never been fired.
It is a 03 5.4 standard bore block been honed and decked
Manley 18cc dish pistons and pins
ModMax H beam rods
ModMax file...
this came off my 2003 Lightning a few years ago when I put a Roush suspension. I have the rear leafs and shackles, front coils,front and rear swaybars, and front and rear bilsteins. the truck had 23,000 miles when this came off. also have a set of brand new rear bilsteins that have never been...
32valve 5.4 out of navigator stock longblock with between 30-40k miles. t45 tremec out of my mustang with 50k miles. engine has a Ram billet aluminum flywheel and centerforce dual friction clutches that i put on to put the 5spd behind it and has never been driven with them. engine also has a...
i have a brand new set of mac long tubes for a cobra i purchased to try to make fir on my 5.4 swap and they will not work. these are brand new and have never been bolted to a motor. they will not fit my car with the dohc 5.4 and i will pay shipping both ways to trade for some FRPP shorties.
I've got a brand new NOVI 2000 head unit that has never had a belt put on it. I bought it new from AMP performance about a year ago and was going to use it on a project i was building but had a change of plans on alot of stuff. it is a regular rotation unit. I also have a bracket and pulley to...
I have the zex wet kit made for the 99-04 mustang gt. not sure of part number because i am at work, but i can get it when i get home. it is the only kit zex makes specifically for these year model gt's though. it is either 50 or 75-175. kit is complete from jets to wiring. the wiring is not...
Got a 2002 Navigator engine with around 30k or 40k miles. Internals are stock, I have had valve covers and timming covers off and everything looks good from there. All the parts that come with it are new and never been used: Paxton NOVI 2000 Blower, brackets pulley's and belt. All the blower...
Got a 2002 Navigator engine with around 30k or 40k miles. Internals are stock, I have had valve covers and timming covers off and everything looks good from there. All the parts that come with it are new and never been used: Paxton NOVI 2000 Blower, brackets pulley's and belt. All the blower...
Got a 2002 Navigator engine with around 30k or 40k miles. Internals are stock, I have had valve covers and timming covers off and everything looks good from there. All the parts that come with it are new and never been used: Paxton NOVI 2000 Blower, brackets pulley's and belt. All the blower...
I need a Cobra cross over for my engine to work with the intake I have. I seen where some people use the factory style tube, and some have braided lineswith AN- fittings, are they putting freze plugs in the front 2 holes and tapping into those, or are they tapping into the block? Also what will...