Search results

03 white cobra coupe 45k miles Clean title no lien 2.93 Billetflow pulley New alternator Sct xcal4 Coil overs on front Flowmaster catback Off road mid pipe Spec 3+ clutch Stock irs Fluidyne heat exchanger Welded subframe connectors Several billet interior pieces Interior is 9.5/10 Exterior is...

What would cause fuel pumps to run constantly when the key is turned on? You can hear them come on with key on and stay running full tilt entire time key is on. Car previously had a return style setup on it but I Have swapped pumps, check wiring on fpdm, back to stock lines, tune is basic email...

Can anyone id these 2 used spec clutches I’ve had laying around? I know they are 10 spline but can’t find anything to help id what stage they are.

I have a stock car that I’m getting ready to put some pieces I’ve gathered up on it. Car will be pretty basic, ported eaton with 2.76 upper, ba2600 maf. Trying to decide on either a boost a pump style or going with a gt super car pump setup.

I just picked up a 03 that is bone stock. I have a jokerz ported eaton with a 2.93on it from another car along with jlt cai and mid pipe/cat back. Who is good with remote tunes for a basic car like this? I have eric korn on my lightning and he said he does cobras but wanted to see what other...

03 Oxford white couple roller I bought car as a rolling shell and have accumulated all the body parts and interior pieces to put it back together. 90k miles Car is located in Jasper AL 8000$ obo

2004 Torch red coupe Dark insert seats 2.93 upper pulley with Billetflow snub idler 8.8 sra with maximum motorsports arms and track bar Center force clutch Kooks long tubes interior is 8.5/10 Exterior is a 7/10 Things shown in pictures it needs, 3rd brake light, trunk needs respray 75k miles on...

Like title states I’m looking for a 3.4” Billetflow upper ring. Black or silver color.

I have a 2003 coupe for sale 133k miles Light grey insert seats Car is bone stock minus a kn air filter Car Has rock chips on the hood Drivers seat bolster is worn Rear end has the clunk like my 03s all have had This car is not perfect paint or flawless by any means. It is in good shape for...

I didn't read the new rules on first post , should be right this time. I bought this car for a project almost 6 years ago and it has sat under a cover in the shop since then. It's time to make room in the shop and let it go. Details Solid axle No seats No engine or Trans Front and rear...

I need the help/votes of the svt community. Every vote and different person that watches the video adds up! http://peakstockcardream.com/mobile/contestant-bio.php?CID=757 http://youtu.be/GTSMbWDDWgg

I bought this car for a project almost 2 years ago and it has sat under a cover in the shop since then. It's time to make room in the shop and let it go. Details Solid axle No seats No engine or Trans Front and rear bumpers were Saleen so I ditched them and car will need front and rear...

I'm looking for a stock h-pipe for my car.

I have a redfire coupe I used for a donor on my 03 roller I bought last year. All I pulled off the wrecked car was the engine, Trans and seats. Every other piece is still on the car. Any ball park on what it's worth to a local person who wants it? Btw it's not for sale as this local person is...

A guy just got a cobra here in town recently and has asked me to install a lower pulley, bap and new clutch cable. I also advised him on asking his tuner what plugs he would like so I can install those. I've done several installs of each of these items over the years but never for money. What Is...

I have always just had debit cards in the 8 years ive had accounts. I have over time ran into times where my debit card has daily limits that my bank says are unremovable. This has led me to want a credit card that I could use on higher purchases, vaction rentals that type stuff. Then just pay...

Metco lower pulley kit 250$ sold Metric double bearing idler kit 300$ sold Mgw shifter 125$ sold Nib slotted rear rotors 100$ 04 iPod adapter for stock radio 30 sold Automated gauge of 50$ sold Boost a pump 125$ sold Spec 3+ nib with flywheel 600$

Im looking for a DSG coupe. I would prefer a 30k+ mile car as I want to drive this one. Im not looking to lowball anyone, just looking for a fair deal. PM me with any details

I didn't think Id do this but here it is. I bought this car in mid Jan and remember why I sold my white coupe. I just don't have the time to keep up a black car. Ive put 290 miles on it since I trailer-ed it home. Car runs perfect with a excellent leak down report. I own it outright and looking...

Few parts I pulled off the coupe I just got NIB Spec 3+ clutch and billet flywheel 650$ MGW Shifter 125$ Metco Idler set 300$ Lower Pulley Kit 275$

Ok so im buying a 04 coupe off a member on here to replace my white 04 coupe i sold in decemeber. The car is financed through ameri credit, and payoff is less than im paying for it. I have the money in full to buy the car with no loan required. In a typical scenerio i have gone with the seller...

I sold my 04 and have a few parts left from it, i don't need on my 03 that i still have. Spec stage 3 + NIB clutch with NIB spec steel flywheel 700$ Used Liberty 26 spline input shaft 225$ Billetflow IRS brace Black NIB 125$ Sold Billetflow IRS BRace 125$ Sold 6lb lower metco ring only 75$ True...

I have a used set of these that I was going to use for a project but have changed my mind. I also have the timing cover that goes with these for sale 250$ for the heads 75$ for the cover or 300 for it all Add shipping and paypal fees.

28k miles Oxford White Coupe Factory Chrome 17" wheels All 4 tires have less than 1,500 miles on them. Flowmaster in stock catback. 1 of 120 Graphite interior OW coupes 2.93 upper Fiore Quadrant and firewall adjuster Diablo handheld. Lowered 1" on all 4 corner New Brake pads front and rear...

After gathering parts one by one as we needed them for installing on jakes car, we have finally gotten it all and started the install. On measuring the endplay with a magnetic base mount dial I get .003 endplay in and out. BUT I can move the shaft up and down which shows .005-.009 on the gauge...