I seem to have maxed out my fuel pump. not certain thats the cuase but for some reason i keep going lean under boost. The injectors are only at 80% duty but adding more fuel in the tune is not fixing the lean spike. I am running an eliminator pump and the aeromotive pro EFI regulator. I managed...
Does the motor actually have to be pulled out of the car to change the heads or can it be done with the motor still in the car? I am hearing people say both.
My car has been sitting for about 2 weeks with out being driven. We finnally got some nice weather so i was going to take it out for a little spin. Fired it up and had it idling in the garage for about 5 minutes or so and have a huge puddle of fluid under the car. it is leaking from right...
I am posting this for a friend!
He is offering a cash reward for the recovery or information leading to the recovery of the below listed parts stolen from my car while at Pro-Street Motor Sports in Garland!
Sometime, supposedly, between February 28th and March 7th, multiple items were...
I have a very low miles (2,000 or so) T-76 BB turbo that i am thinking about selling. It is still on the car as of now but i could have it off i a few days if it sells. Looking at turbonetics website this turbo goes for $2,230 new. I would like to get about $1,300 for it but i am open to any...
How do you like it? is it a pain to get back to first/N on the street etc. watched some widows from B & M and it looks like a pain with the lever for lock out etc.
What cutches are you guys using? i just burned up my second street dual in less than 6 months. the car has barely been driven this year. wonder what you guys are having good luck with.
Down to the end - help Jared out...
--------------------------------------------------------------------------------
The contest for Jared to win to be the new spokesperson for the MyLifeMyMoney website ends in a few days... He needs everyone's help... No, he didn't ask me, or even know...
Well it has been a long time coming, and i know that some people on here have been waiting for this post. After 5 months of building i finally got the car on the dyno and got some serious pulls out of it. for those that do not know here is the complete mod list giver or take a few things i may...
Still trying to work out my pump gas tune. to this point the best pull the car has been able to make with out detonating is 575 hp that was with close to 17 psi with only 8 degrees of timing. i have a single 76 car with a .20 over bore. for some reason it will not hold any timing. we thought...
Hey guys i searched but did not come up with much, I am trying to find out what kind of track times are guys running the hellion t-76 kit with a t-56 trans in the car. What kind of 60fts are you able to pull and whats the best technique for launching a car with this setup?
I have 28" slicks in the rear and i am deciding what size diameter skinny to run up front. i am looking at either doing a 22.5 " or a 24". are there any other guys running these combos. i wonder if having a 28 out back and a 22.5 up front would cause the car to sit at an obnoxious angle. anyone...
I am about to get a set of 15x 3.5 weld prostars for the fornt of my 03 cobra. i know i need longer studs for the rears to fit, but what about in the front? Also could someone who is running the 1" spacer up front post up a link for the proper/best spacer for the job. i would really...
Looking for a set of prostar skinnies 5 lug. let me know what you have and what you are looking to get shipped to 55330. thanks if they have tires on them that is fine as well.
This may have been aske before so i apologize if it is redundant.
I have a solid axle swap to a 9". i am trying to find out what is the widest wheel and tire and can run in the rear? does a 12" prostar fit or will ti be limited to the 10"? i have heard that a 335 hoosier will not fit in...
I have the IRS out of my 2003 cobra. The car has 48,000 miles on it. The only thing not included with the IRS is the rear brake calipers i kept them since i have a 10th anniversary car and would like to keep the red ones to match the front. The irs has a Billetflow IRS brce installed on it...
So i am doing a solid axle conversion over to a moser 9". i guess there is an issue with the stock driveshaft being compatible with the 9". So I am looking at getting a new driveshaft as well. I have the t-56 still but am trying to figure out what the drive shaft measurement would be for this...
I have a 99/01 cobra lower intake manifold for sale. I just bought it but then found one that was powder coated and decided to get that one also, so now i am seling this one. would like to get $250 for it shipped. I will get some pics up asap or if you are interested pm and i gan get some out...