My 2001 Bullitt with only 28k miles has a leaking driver's side headlight. Anyone have an 01-04 left headlight laying around? All the used ones I look at are oxidized and look horrible. Aftermarket headlights leak from what I hear...
I have had several Mustangs and SCT tuners for all of them. My current Cobra does not need a dyno tune yet. Still need to make a few more mods ;) Car runs perfect, makes no strange noises, but gets hot in traffic.
I ordered the Bama SCT X4 tuner to lower my fan low/high temps to 200/210...
My 1996 Cobra was bone stock until this year. She is pretty much still stock, but I need a tune. I have always had an X3 and had my cars dyno tuned. I saw the new X4 and it looks pretty cool. My dyno tuners are hours away and my car is pretty much stock. Would like to add some bolt ons, get...
I want to keep the car somewhat stock in appearance, but the stock mufflers are very quiet. Typically, I put a Magnaflow catback on all of my Mustangs, but the SN95 does not look good with large tail pipes. I am looking for suggestions on mufflers that can be welded in, but retain the existing...
Looking for a set of 265/35/18 and 295/35/18 tires. Been looking at the Potenza RE760s. I Google searched and found a few examples of the RE760 tires. Do they run narrow, normal, or wide? I would love to see some pics if you have used these in the past or currently.
Mainly concerned with...
I have had what seems like 10 straight new edge Mustangs and this is my first SN95 Cobra. I am not sure if the same options for springs worked on my 1996 Cobra. I remember using Ford Racing C-springs and 93 Fox struts on a 2000 GT I had. The fox struts were shorter and worked well with...
I have been comparing the locations of my driver and passenger fender emblems. They don't seem to be in the same exact locations.
So, I checked out 100 pages of the picture thread. I found Cobra fender emblems with the base right on the fender line and I also found emblems with a small space...
You guys know better than me. What would a 1996 Mystic Cobra with 20k miles be worth? The car is stock, except for Eibach lowering springs and tinted windows. I still have the stock springs. It is in mint condition. No accidents.
I know worth and market value are often different. I see...
Hey guys. I meant to order some Nitto 555s, and accidently ordered the Nitto 555Rs. I just got them yesterday and they couldn't be any newer. I am just going to sell them instead of paying return shipping.
$350 for the pair picked up. I might ship them, but rather find someone close to sell...
As some of you may know, I have had my share of Cobras, Mustangs, Mach 1s, Saleens, etc. Even had a Lightning for a short time. After 10 straight Fords, I saw this little beauty and was ready for a change. It was very fun and I have owned it longer than any other car. It's a 2008 Chevy...
Have an 04 Cobra and want to buy a new transmission. What are our choices? I found a new version of the T56 (Magnum), but it requires you to shorten the drive shaft an inch along with a few other small modifications. It is priced reasonably at $2800 and comes with a 26-spline input shaft...
Just throwing it out there for trade or sale. Completely finished, 660rwhp, and turn key. The built short block is bulletproof, MPH heads and blower cams flow well and allow for added boost, 2.8H Kenne Bell provides 24psi of boost, AFCO H/E, D&D T56 Viper Spec 6-speed, aluminum balanced DS...
I just picked this up a few months ago with my latest dyno tune. It is like brand new and has the original packaging and install disk. I returned the tune back to stock, leaving the X3 unlocked and ready to go.
I don't know what these are going for right now, but I will start at $270 obo...
I just picked this up a few months ago with my latest dyno tune. It is like brand new and has the original packaging and install disk. I returned the tune back to stock, leaving the X3 unlocked and ready to go. If you want, I can have a preinstalled tune for your car uploaded to the device, but...
I just picked this up a few months ago with my latest dyno tune. It is like brand new and has the original packaging and install disk. I returned the tune back to stock, leaving the X3 unlocked and ready to go. If you want, I can have a preinstalled tune for your car uploaded to the device, but...
Just throwing it out there for trade or sale. Completely finished, 660rwhp, and turn key. The built short block is bulletproof, MPH heads and blower cams flow well and allow for added boost, 2.8H Kenne Bell provides 24psi of boost, AFCO H/E, D&D T56 Viper Spec 6-speed, aluminum balanced DS...
Just throwing it out there. Completely finished, 660rwhp/600rwtq, and turn key. Short block forged and is bulletproof, MPH Stage 2.5 heads, Blower cams, 2.8H Kenne Bell providing 24psi of boost, AFCO H/E, D&D T56 Viper Spec 6-speed, aluminum balanced DS, built rearend with 3.73s, aluminum...
Tried replacing my Kenne Bell heat exchanger with an AFCO Pro-Series heat exchanger for an 03/04 Cobra. The brackets are completely different. Not even close. Fail on the install.
Anyone have a set of heat exchanger brackets laying around? It would be much easier than fabricating...
Looking for 03/04 heat exchanger brackets. These hold the heat exchanger in place behind the front bumper cover. Let me know if you have them laying around. Thanks.
Wondering if I could pick some of your minds here. I have an Alky injection system setup on my 2.8H Kenne Bell. These injection systems usually are used on turbo cars like the Grand National. On my car, it serves as an octane booster to run 20 psi of boost (was 22-25 psi).
Questions: What...
I have a 3.1 Billetflow pulley on my 2.8H Kenne Bell. It makes 22/23 psi of boost on a hot day. On a cold day, it has seen 25 psi.
Where can I find KB pulleys? BF makes a 3.4, but it is not the new design. I like the looks of the RR pulleys. Any ideas on a pulley that will allow me to...
I have used 315/30/18 Mickey Thompson ET Street drag radials in the past with great success. I was cutting 1.5/1.6 60's all day long on 18x10 street wheels with my 03 Cobra.
I see they also sell BF Goodrich 315/30/18 drag radials too. Since my front tires are 265/35/18 BF Goodrich KDWs, I...
I am running my 2.8H KB with a 3.1 BF pulley. I am seeing 22psi of boost. On my street tune, the timing is really low, around 14 degrees. I am also spraying 100% methanol to raise the octane (guess its cheaper than torco).
How much boost is too much? My race/torco tune uses 24 degrees of...