These DOT tires measure 10" wide. Fit's under 03-04 Cobra with no modifications what so ever. Real good condition, these tires have only 6 passes on them. Lot's of rubber and tread left on them. M5 compound, 88" circumference.
No wheels with them, just tires. They must be mounted on a 9-11"...
These DOT tires measure 10" wide. Fit's under 03-04 Cobra with no modifications what so ever. Real good condition, these tires have only 6 passes on them. Lot's of rubber and tread left on them. M5 compound, 88" circumference.
No wheels with them, just tires. They must be mounted on a 9-11"...
Go here for all the details. I made a webpage that details this car completely. The site is at http://mysite.verizon.net/vze894wt/
If you have any questions, email me at
[email protected] for the quickest reply. I will also keep checking this board too.
thanks
Dave King
This is BLOWN03's version of the ICE BOX. Fit's any 03-04 Cobra where the stock battery goes. This holds over 2.5 gallons of water. I had an aluminum screen welded in at the bottom of the box. The box normally doesn't come with a screen.This is the box without the battery holder. It has an extra...
I have a 04 Cobra K&N CAI. I also have 2 filters that I will sell with it in addition to the stock 9" filter that it comes with. One filter is a 10" S&B filter that has had about 1000 files on it. The 2nd extra filter is a 12" S&B filter that has never been used.
I will sell all of the...
I have the full race version for sale. It's been on the car for only 2 days and 50 miles. Paid $300 for it, will be flexible with the price.
Please email me for the fastest replies at [email protected]
For all those that are running a metco alternator pulley. What size spacer are you using? Has anyone used the larger spacer and found that it causes the outter belt to wear out prematurely?
I have a very slight belt alignment problem where I'm seeing a ton of belt dust and have the outter...
Can someone give me the electric diagrams for the charging system and also fuse box in the engine compartment?
I keep blowing the 20 amp fuse and I want to see where the wiring goes to see if its shorting to ground.
Email is [email protected]
thanks
Dave
Fits all Eaton/Whipple/Kenne Bell blower Puts the tensioner on the correct side of the blower and is adjustable to help different size belts fit. Helps reduce belt slippage. Only on engine for 1500 miles, good condition. Paid $200 for it.
No reasonable offer refused.
Contact Dave @...
Went automatic and no longer need this shifter. Shifter is for a T-56 transmission. Less than 2500 miles on the shifter. Comes with 2 handles GS Racing handle which allows you 2 different heights to set it at. Also the Pro 5.0 handle is includes as well.
Make offer, no reasonable offer...
Went automatic and no longer need this shifter. Shifter is for a T-56 transmission. Less than 2500 miles on the shifter. Comes with 2 handles GS Racing handle which allows you 2 different heights to set it at. Also the Pro 5.0 handle is includes as well.
Make offer, no reasonable offer...
I went to a 10 rib setup and no longer need the 2 pulleys I have. I have a 3" pulley and a 3.5" pulley. $50 for the 3.0 and $20 for the 3.5"
Email Dave @ [email protected]
Stock Motorcraft belt
Goodyear 77.2
Gates 77.5
Gates 82.0
Gates 83.9 (Quantity of 3)
All belts are in very good condition and have very limited miles on them.
All belts are $15.
Contact Dave @ [email protected]
K&N CAI. I will throw in 3 different air filters with this setup. Paid $300 for the K&N CAI plus $90 for the 2 air filters. Will sell all for $150.
Contact Dave at [email protected]
Whipple Adjustable Idler. Paid $250 new. Will sell for $115. Allows different belt sizes to fit correctly by picking up extra slack. This also puts the idler on the correct side of the blower. I will take Paypal or money orders. Can send pics if needed.
Contact Dave at [email protected]
T56 transmission out of a 04 Mustang Cobra
5200 miles on it, freshly rebuilt (no miles on it since rebuild) with new 6th gear assembly
26 Spline Input shaft
MGW shifter
Crossmember
MC LEOD cable, quadrant, and fire wall adjuster.
The transmission has 5180 miles on it exactly.
It has...
T56 transmission out of a 04 Mustang Cobra
5200 miles on it, freshly rebuilt (no miles on it since rebuild) with new 6th gear assembly
26 Spline Input shaft
MGW shifter
Crossmember
MC LEOD cable, quadrant, and fire wall adjuster.
The transmission has 5180 miles on it exactly.
It has...
--------------------------------------------------------------------------------
I am converting my 04 Cobra to an automatic (can't keep a clutch in the car) and everything must go.
T56- 5200 miles on it, freshly rebuilt with new 6th gear assembly
26 Spline Input shaft
Aluminum...
04 Cobra K&N CAI. I will throw in 3 different air filters with this setup. Paid $300 for the K&N CAI plus $90 for the 2 air filters. Will sell all for $150.
Contact Dave at [email protected]
04 Cobra Whipple Adjustable Idler. Paid $250 new. Will sell for $115. Allows different belt sizes to fit correctly by picking up extra slack. This also puts the idler on the correct side of the blower. I will take Paypal or money orders. Can send pics if needed.
Contact Dave at...
Metco 8 pound lower kit complete with 3 position bracket. Aluminum Hub and 8 pound ring. Billet Aluminum Idler Plate with all hardware and tools. Paid $428 for it. Great condition will sell for $260.
Contact Dave at [email protected]
SCT BA2800 Mass air electronics with C&L housing. Less than 6 months old, bought new. I have the original SCT housing also which I will throw in for free. Paid $275 for mass air and $150 for the C&L Housing. Will sell both for $250
Email Dave at [email protected]
SCT BA2800 Mass air electronics with C&L housing. Less than 6 months old, bought new. I have the original SCT housing also which I will throw in for free. Paid $275 for mass air and $150 for the C&L Housing. Will sell both for $250
Email Dave at [email protected]