Looking for a little bit of info if anybody can help. I recently acquired this 2v pi motor out of a wrecked 01 gt with absolutely no paper work or anything. I'm trying to figure out what cams are in it as well as what bottom end.
It is fully forged with h beam rods with Manley pistons and has "4.75" milled into the oil pump cover. The cams have the hex in the center and have the stamping "left 660 416684" on the shaft near the rear of the drivers camshaft. I never investigated the number on the passenger.
I've tried searching for cam information and can't come up with anything. I believe the rotating assembling is an mmr piece but still has a factory ford part number on the forged crank (I forgot to write the number down) Any information on what some of this might be would greatly be appreciated so I can start figuring out what I want to do with it.
It is fully forged with h beam rods with Manley pistons and has "4.75" milled into the oil pump cover. The cams have the hex in the center and have the stamping "left 660 416684" on the shaft near the rear of the drivers camshaft. I never investigated the number on the passenger.
I've tried searching for cam information and can't come up with anything. I believe the rotating assembling is an mmr piece but still has a factory ford part number on the forged crank (I forgot to write the number down) Any information on what some of this might be would greatly be appreciated so I can start figuring out what I want to do with it.