04 cobra torque specs

[red04svtcobra]

Does anyone know what the correct torque specs are for my 04 cobra. The ones I need are the lower intake and the blower

 

[IronTerp]

From your other thread.........

Kirk50 did nice writeup on this procedure....Check it out below.

Torque specs are intake manifold to heads = 15 ft lbs, supercharger to intake = 18 ft lbs + 90 more degrees.

http://69.13.120.175/forums/showthread.php?t=266805

 

[Screamin Cobra]

^^^+1, Also, be very very careful with those lower intake bolts. Breaking one of those baby's in one of your heads would suck.

 

[red04svtcobra]

well I broke a lower intake boot! man this sucks!

 

[jm@ReischePerf]

well I broke a lower intake boot! man this sucks!

Oops you didn't reuse the old ones did you? That's a no no.

 

[red04svtcobra]

Yes I reused the old ones. I thought the only ones you couldn't reuse were the intercooler bolts. Am I able to reuse the blower bolts and the thing that is on the front of the lower intake that connects to the intercooler?
Do you think I should replace both gaskets too, the metal one for the blower and the plastic one for the lower intake?