Just relisting this for those that were interested since the forum change.
Testing the waters on letting my car go.
Its a 2001 GT with a forged 01 Cobra motor built by Steen Racing. The mods consist of the following.
Engine/Exhaust
2001 Forged Cobra motor - Diamond pistons, Manley rods, ARP main studs
Port/Bowl blend on the heads w/ valve job
P&P stock intake
Vortech SQ with GT Impeller and 2.95 RR 8-rib pulley setup
AFM PP
Vortech mini race bypass
SCT 2400 meter
Hooker Jet Hot LTs and matching o/r X
Magnaflow Catback
Drivetrain
Tremec 3550
Steeda Tri-Ax
Lakewood scattershield
Spec III
Steeda firewall adjuster and double hook quadrant
FRPP Aluminum DS
4.10 Gears
Fuel System
2003 Cobra pumps/tank
KB BAP
MD Fuel line upgrade
BAP rewire w/10awg wire
60lb injectors
Suspension
D&D Tubular K-Member w/ 250lb coilovers
Tokico 5-way Shocks/Struts all around
H&R SS's in the rear
MM Full length subframes
MM Lower Control Arms
MM c/c plates
Appearance
Ford 00 R hood
01 Cobra front bumper
18x9.5 Y2K Cobra Rs
MW Stainless inserts
00 S281 Wing
15% tint
Interior
Corbeau Carrera seats
A-pillar gauges boost/fuel/air fuel
Other
Battery relocated into trunk.
The car has 32,650 miles on it and is in great condition. It was dynotuned by Kauffman motorsports in Dillsburg PA and makes ~550rwhp and drives beautifully. It is a great street/strip car, and I have driven it almost every day with this kind of power with no issues.
I also have hundreds of pics, several dyno sheets, and a few videos I can produce upon request.
You can visit my website at http://www.blackgt.cjb.net/ for a lot of info and history of the car. (Although the information on the site is not current)
The 4v swap was performed by Steen Racing and work was also done by LaRoccas Performance.
I am asking $23,000 US or best offer. You can PM me or email me at [email protected] or [email protected]. Yes I am aware that mods dont necessarily add to the cars value, but we all know the kind of money it would take to build this car, which is why I think the price is reasonable. Thanks guys.
Im entertaining offers in the 20k range. Ive replied to all your PMs and emails via email. :thumbsup:
Testing the waters on letting my car go.
Its a 2001 GT with a forged 01 Cobra motor built by Steen Racing. The mods consist of the following.
Engine/Exhaust
2001 Forged Cobra motor - Diamond pistons, Manley rods, ARP main studs
Port/Bowl blend on the heads w/ valve job
P&P stock intake
Vortech SQ with GT Impeller and 2.95 RR 8-rib pulley setup
AFM PP
Vortech mini race bypass
SCT 2400 meter
Hooker Jet Hot LTs and matching o/r X
Magnaflow Catback
Drivetrain
Tremec 3550
Steeda Tri-Ax
Lakewood scattershield
Spec III
Steeda firewall adjuster and double hook quadrant
FRPP Aluminum DS
4.10 Gears
Fuel System
2003 Cobra pumps/tank
KB BAP
MD Fuel line upgrade
BAP rewire w/10awg wire
60lb injectors
Suspension
D&D Tubular K-Member w/ 250lb coilovers
Tokico 5-way Shocks/Struts all around
H&R SS's in the rear
MM Full length subframes
MM Lower Control Arms
MM c/c plates
Appearance
Ford 00 R hood
01 Cobra front bumper
18x9.5 Y2K Cobra Rs
MW Stainless inserts
00 S281 Wing
15% tint
Interior
Corbeau Carrera seats
A-pillar gauges boost/fuel/air fuel
Other
Battery relocated into trunk.
The car has 32,650 miles on it and is in great condition. It was dynotuned by Kauffman motorsports in Dillsburg PA and makes ~550rwhp and drives beautifully. It is a great street/strip car, and I have driven it almost every day with this kind of power with no issues.
I also have hundreds of pics, several dyno sheets, and a few videos I can produce upon request.
You can visit my website at http://www.blackgt.cjb.net/ for a lot of info and history of the car. (Although the information on the site is not current)
The 4v swap was performed by Steen Racing and work was also done by LaRoccas Performance.
I am asking $23,000 US or best offer. You can PM me or email me at [email protected] or [email protected]. Yes I am aware that mods dont necessarily add to the cars value, but we all know the kind of money it would take to build this car, which is why I think the price is reasonable. Thanks guys.
Im entertaining offers in the 20k range. Ive replied to all your PMs and emails via email. :thumbsup:
Last edited: