bmoore1488
New Member
Well here it is guys, thinking about moving back to SC and in order to do that I must make room for some extra money, so here we go as much as I hate to do this I have to consider selling my car. I have a ton of money invested in this thing in parts and labor and I will not give it away so please no crazy low ball offers. Keep in mind that the car still books for over $31,000 and I have well over $18,000 in parts alone not including labor. All parts listed have just under 1000 miles on them.
Year: 2015
Make: Ford
Model: Mustang
Trim: Base
Color: Black
Transmission: Manual
Mileage: ~7500
Modifications: See below
PRICE: $41,000 OBO
Contact: 864-378-3424
Ok here we go, all parts are installed on the car except for the Mcleod RXT HD 1200 clutch, lightened flywheel and clutch line. I have not had time to get it installed and just bought it for extra security. The stock clutch is holding just fine at the moment but the RXT will come with the car. Ok here is all the rest that is installed in the car. I also have an ARP front splitter NIB with support rods, and some black out headlight covers NIB, that haven’t been installed yet either.
- 2.9 Whipple, 132 Throttle body, 72lb injectors, twin fans and flight control software w/ latest tune and 4 Pulleys to choose from 3.75, 3.625 (Currently on the Car), 3.5 and 3.25- $7854.00
- MMR Billet Timing chain gear and Oil pump gear- $460.00
- Vibrant o2 foulers (keeps the car from throwing codes due to no cats) - $42.00
- ARP Balancer Bolt and Flywheel bolts- $84.00
- MSD BAP- $400.00
- FRPP Half shafts- $1554.00
- Stainless Power 1 7/8” x 3” Performance connect Catless Headers- $759.00
- Custom 3” H-Pipe by Exhaust Pros- $173.00
- Flowmaster Outlaw axle back- Free- Exhaust is 3” from headers back, no neck downs
- K&N Valve cover breathers- $50.00
- Steeda Trans Bushing- $30.00
- Steeda IRS Subframe support Braces- $194.00
- Stance SF03 Wheels 20x10 front 20x11 rear brushed titanium- $1840.00
- Nitto 275/35R20 NT05 315/35R20 NT05R Tires- $1172.00
- 17x9.5 Racestar Rear Wheels and lug nuts (Still New in Box for Drag Strip) - $468.00
- BMR Rear Cradle Bushing Kit Delrin BK048, Diff Bushing Kit Billet Alum. BK050, Lower control arm bearing kit BK055, Vertical links TCA045, Adj. Rear Toe Rods TR005R- $727.00
- FRPP Knuckle to Toe Bearings- $73.00
- Viking Crusader Drag Shocks- $522.00
- McLeod RXT HD 1200 Twin Disk clutch, braided steel clutch line, Lightened Steel Flywheel- $1352.00
- ARP Front Splitter (New in box, not yet installed) - $387.00
- UPR 5.0 Black Badges- $30.00
- GTS Blackout headlight covers (New in box, not yet installed) - $59.00
- FRPP Decklid GT badge delete panel- $139.00
- Diode Dynamics LED reverse light and Switchback turn signals- $85.00
- PP Front Lip- $89.00
- For the right offer I will also throw in about 40 gallons of 260 GT plus Race fuel (for the smaller pulleys)- Roughly $9.00 per gallon
I am currently running Royal Purple HPS 5w-20 oil with less than 500miles on the last oil change and have 3 bottles of Royal Purple Syncromax that will come with the car, just haven’t gotten around to putting it in the transmission yet. All parts have less than 1000 miles on them as I very rarely drive the car. It has always been garaged kept under a car cover. Also all the factory parts ie. Intake, headers, axles and whatever else I have will go with the car also if the buyer wants them.
Year: 2015
Make: Ford
Model: Mustang
Trim: Base
Color: Black
Transmission: Manual
Mileage: ~7500
Modifications: See below
PRICE: $41,000 OBO
Contact: 864-378-3424
Ok here we go, all parts are installed on the car except for the Mcleod RXT HD 1200 clutch, lightened flywheel and clutch line. I have not had time to get it installed and just bought it for extra security. The stock clutch is holding just fine at the moment but the RXT will come with the car. Ok here is all the rest that is installed in the car. I also have an ARP front splitter NIB with support rods, and some black out headlight covers NIB, that haven’t been installed yet either.
- 2.9 Whipple, 132 Throttle body, 72lb injectors, twin fans and flight control software w/ latest tune and 4 Pulleys to choose from 3.75, 3.625 (Currently on the Car), 3.5 and 3.25- $7854.00
- MMR Billet Timing chain gear and Oil pump gear- $460.00
- Vibrant o2 foulers (keeps the car from throwing codes due to no cats) - $42.00
- ARP Balancer Bolt and Flywheel bolts- $84.00
- MSD BAP- $400.00
- FRPP Half shafts- $1554.00
- Stainless Power 1 7/8” x 3” Performance connect Catless Headers- $759.00
- Custom 3” H-Pipe by Exhaust Pros- $173.00
- Flowmaster Outlaw axle back- Free- Exhaust is 3” from headers back, no neck downs
- K&N Valve cover breathers- $50.00
- Steeda Trans Bushing- $30.00
- Steeda IRS Subframe support Braces- $194.00
- Stance SF03 Wheels 20x10 front 20x11 rear brushed titanium- $1840.00
- Nitto 275/35R20 NT05 315/35R20 NT05R Tires- $1172.00
- 17x9.5 Racestar Rear Wheels and lug nuts (Still New in Box for Drag Strip) - $468.00
- BMR Rear Cradle Bushing Kit Delrin BK048, Diff Bushing Kit Billet Alum. BK050, Lower control arm bearing kit BK055, Vertical links TCA045, Adj. Rear Toe Rods TR005R- $727.00
- FRPP Knuckle to Toe Bearings- $73.00
- Viking Crusader Drag Shocks- $522.00
- McLeod RXT HD 1200 Twin Disk clutch, braided steel clutch line, Lightened Steel Flywheel- $1352.00
- ARP Front Splitter (New in box, not yet installed) - $387.00
- UPR 5.0 Black Badges- $30.00
- GTS Blackout headlight covers (New in box, not yet installed) - $59.00
- FRPP Decklid GT badge delete panel- $139.00
- Diode Dynamics LED reverse light and Switchback turn signals- $85.00
- PP Front Lip- $89.00
- For the right offer I will also throw in about 40 gallons of 260 GT plus Race fuel (for the smaller pulleys)- Roughly $9.00 per gallon
I am currently running Royal Purple HPS 5w-20 oil with less than 500miles on the last oil change and have 3 bottles of Royal Purple Syncromax that will come with the car, just haven’t gotten around to putting it in the transmission yet. All parts have less than 1000 miles on them as I very rarely drive the car. It has always been garaged kept under a car cover. Also all the factory parts ie. Intake, headers, axles and whatever else I have will go with the car also if the buyer wants them.
Last edited: