adjusting fuel pressure safety switch

AR15Cobra

New Member
Established Member
Joined
Oct 29, 2003
Messages
7
Location
Virginia
How do you adjust the fuel pressure safety switch on an NOS nitrous kit (05116)? I am having problems with my kit clicking on and off repeatedly. I have heard that it is the fuel pressure dropping low and then building up and going through this cycle over and over again. I would like to adjust it to 30PSI to see if that is the problem.
 

97SVTStang

New Member
Established Member
Joined
May 17, 2003
Messages
286
Location
St. Petersburg, FL
There is no way to adjust the actuall fuel pressure safety switch. I didn't use a fuel pressure safety switch, I just watch my fuel psi. gauge really close.
 

AR15Cobra

New Member
Established Member
Joined
Oct 29, 2003
Messages
7
Location
Virginia
that's funny, cause someone told me that it could be adjusted by pulling the rubber gromet off and turning the allen screw counterclockwise. Granted this was for a NX kit. Is our fuel pressure safety switch different than on a NX kit?
 

97SVTStang

New Member
Established Member
Joined
May 17, 2003
Messages
286
Location
St. Petersburg, FL
On second thought I just pulled my fuel psi safety switch out and there is a rubber cap that when taken off there is a screw and its threaded. So I guess it can be done, only problem is your woking blind with it you actually wont know what you set it at.
 

Users who are viewing this thread



Top