Albuquerque dyno edge Review

NightRide

Roll Racer
Established Member
Joined
Mar 29, 2011
Messages
3,439
Location
New Mexico
So thought i would do a review since we are always wondering where the good mustang shops are. I live between el paso and tucson which have no performance shops. Only one's are up in Phoenix or Albuquerque so i chose dyno edge based on forum advice. I've been to quite a few shops and when i walked in this one, there was All mustangs, good sign.

I had been having a problem remote tuning my car as it kept pulling timing at different rpms. Chris lowered the knock sensors by 20% and knock went away. After a few pulls noticed a minor exhaust leak near the motor i would have never found. Put new bolts and tightened it down, turned the sensors back to 100% and still didn't pull timing at wot. Car runs great and Chris really took his time and has a lot of experience. I would highly recommend them if you have a mustang.
 

2011 gtcs

GT500 poster
Established Member
Premium Member
Joined
Mar 7, 2011
Messages
8,454
Location
Arizona
That's great to hear. I wish there was a great Shelby/cobra tuner in AZ. I have had good luck with Lund racing.
 

Users who are viewing this thread



Top