Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Mustang Forums
2015+ S550 Mustangs
Interior and Exterior
At Step 50 of 50 and front bumper hung up on passenger side.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="robertlyons" data-source="post: 15984002" data-attributes="member: 9775"><p>You are absolutely, positively sure you have removed the God damed 7mm bolt that's about twice as long as it has a right to be that does nothing but make sure the edge between the fender and the bumper cover stays straight, correct? The one most videos show coming out in 10 seconds, but in reality takes over 5 minutes due to the wheel well interference and the fact that you probably still have the wheel on the car, yes? If you have that one out, there is nothing but friction holding the bumper cover on. I'd reconnect the driver side, go to the passenger side and pull the bumper cover 90 degrees out from the fender. It makes some ugly sounds, but it should pull away. do the same to the driver's side, then lift and pull away the bumper cover. Oh, and make sure you detach all three light harnesses on each side first. I just replaced my intercooler after putting it off for a long time, dreading the bumper cover removal. But that was the easiest part, except for those MoFo 7mm bolts that hold the cover to the fender. Did I mention how much I hate those bolts?</p><p></p><p>Good luck.</p></blockquote><p></p>
[QUOTE="robertlyons, post: 15984002, member: 9775"] You are absolutely, positively sure you have removed the God damed 7mm bolt that's about twice as long as it has a right to be that does nothing but make sure the edge between the fender and the bumper cover stays straight, correct? The one most videos show coming out in 10 seconds, but in reality takes over 5 minutes due to the wheel well interference and the fact that you probably still have the wheel on the car, yes? If you have that one out, there is nothing but friction holding the bumper cover on. I'd reconnect the driver side, go to the passenger side and pull the bumper cover 90 degrees out from the fender. It makes some ugly sounds, but it should pull away. do the same to the driver's side, then lift and pull away the bumper cover. Oh, and make sure you detach all three light harnesses on each side first. I just replaced my intercooler after putting it off for a long time, dreading the bumper cover removal. But that was the easiest part, except for those MoFo 7mm bolts that hold the cover to the fender. Did I mention how much I hate those bolts? Good luck. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Mustang Forums
2015+ S550 Mustangs
Interior and Exterior
At Step 50 of 50 and front bumper hung up on passenger side.
Top