Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
New Edge Cobras
Engine / Transmission harness questions
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="52merc" data-source="post: 17007986" data-attributes="member: 197"><p>The green connectors are for the front O2 sensors. Here is the information on the connectors for the O2 sensors:</p><p></p><p>C168 - Green housing, Left front, Wires - RD/BK, GY/RD, RD/YE, YE/LB</p><p>C169 - Green housing, Right front, Wires - GY/LB, GY/RD, RD/YE, RD/WH</p><p>C193 - Blue housing, Left rear, Wires - VT/LG, GY/RD, RD/YE, TN/YE</p><p>C196 - Violet housing, Right rear, Wires - RD/LG, GY/RD, RD/YE, WH/BK</p><p></p><p>The two left side O2 sensors should be on one harness leg. The blue colour of the rear sensor connector should tell you which green connector is for the left front. The other leg with the violet connector will be for the right side and that will determine the connector for the right front. Now, from your pictures it appears that both rear connectors could be black. Then you will need to look at the wire codes to determine left (driver side) from right (passenger side). </p><p></p><p>I'll have to go out and look for that other 2-pin connector.</p></blockquote><p></p>
[QUOTE="52merc, post: 17007986, member: 197"] The green connectors are for the front O2 sensors. Here is the information on the connectors for the O2 sensors: C168 - Green housing, Left front, Wires - RD/BK, GY/RD, RD/YE, YE/LB C169 - Green housing, Right front, Wires - GY/LB, GY/RD, RD/YE, RD/WH C193 - Blue housing, Left rear, Wires - VT/LG, GY/RD, RD/YE, TN/YE C196 - Violet housing, Right rear, Wires - RD/LG, GY/RD, RD/YE, WH/BK The two left side O2 sensors should be on one harness leg. The blue colour of the rear sensor connector should tell you which green connector is for the left front. The other leg with the violet connector will be for the right side and that will determine the connector for the right front. Now, from your pictures it appears that both rear connectors could be black. Then you will need to look at the wire codes to determine left (driver side) from right (passenger side). I'll have to go out and look for that other 2-pin connector. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
New Edge Cobras
Engine / Transmission harness questions
Top