Item: SVT Powerworks
Location: Dallas, TX
email: blah4blah4blah (at) yahoo DOT com
Estimated WHP: 250'ish.
Price: asking 2800 shipped (keep in mind, it will cost about 100 bucks to ship it) for the entire kit including the new parts and parts that had to be sourced, that I have bought for it.
I have sourced all the parts to make this a pretty much complete kit. The only thing I do not have is a conical air filter for it.
On the top half of the supercharger (intercooler half), the mounting point of the throttle body was damaged by the previous owner. I had a machine shop professionally drill and level the mounting point. One of the holes where the two halves of the blower attached is not round, I missed this when i took it to the machine shop, but they told me this can easily be fixed with a basic tap set.
One of the bolts that holds the snout on is stripped, the previous owner took a bolt removal tool to it. I was still able to torque it down securely. The snout does not have supercharger oil in it, but I am providing a bottle of GM supercharger oil for the new owner to fill up. I sealed the snout to the blower with the required Anerobic gasket and loc-tited the bolts.
Comes with the snout already modified from Karl at Massive Speed System, and includes two pullies (the 2.6 and 2.4).
I purchased a new gates tensioner and belt for the 2.6 pulley.
Will come with 42 lb injectors (not pictured).
