The thought if selling my 03 cobra has crossed my mind and I dont seem to hold on to cars for to long. I have found a turboed fox body that has caught my eye so I may be moving this to get it.
I just bought the car about 1.5 months ago from a person in Cary, NC(StacyStangz Boyfriend). He was the original owner and is a master tech. He is very meticulous with the car and everything was done right. Since I bought the car I have spent about $2k on it to get it where I wanted it. The car has the best of the best parts and you want be dissapointed.
The car is DSG and it has approx 27k miles on it and the windows are 5% tint and 15% on the rear.
Here is a complete list of mods
DSG 2003 Cobra
#6130 of 8394
Stiegemier Stage 3 "Oval" port,
2.85" Non slip RR Upper Pulley,
100MM Idlers,
Diablo Mafia
SCT XCAL 2 - tuned by RWTD
KB BAP w/ Wiring Upgrade
Upgraded Viton Supercharger Snout Seal
GM supercharger oil
DFX clutch and PP "26 spline upgrade",
Fidanza Aluminum Flywheel,
Liberty 26 spline input shaft
Centerforce Heavy Duty Throw Out Bearing
GM Synchromesh Trans Fluid
TR 6's ".032",
Gords HE
LFP Large Frame Radiator,
LFP Polished Intercooler Reservoir,
LDC Cooling Mod
Polished Accufab TB + Inlet,
Steeda Tri-ax shifter with Knob
Bassani Catted X-pipe (take cats in or out)
Mac 3" Cat-back
Oil Separator
JLT True Cold Air with 12" K&N Filter (custom Painted)
285 Nitto 555's in front 80% tread left
315 Nitto DR's 35% tread left
Slotted Front Rotors
Carbon Fibre Rear Bumper inserts
Windows tinted
IRS Brace
Siemen Deka 60# injectors and Harness
DynoJet WBC
Raptor Shift Light
Price: $25k Firm
Also I have some other parts for sale for an additional price if interested.
1)Centerline Telstars(15x8,15x3, 275-50-15 ET Street Radials(100miles), Kuhmo 165r15 front tires, 1.25" Hubcentric spacers for front - $900 Extra
2) Brand New DynoTune Dy Nitrous Setup w/ jets from 25-125, Dynotune Window Switch, Dynotune Bottle Heater and DynoTune Purge Kit - $600 Extra
3)H&R Race Springs - $150 Extra
I will sell the car with any of the parts listed above if interested. If not they will be sold seperately. If you are interested let me know and I can get you some more pictures
Thanks
Jeremy
[email protected]
Here is a couple pictures
I just bought the car about 1.5 months ago from a person in Cary, NC(StacyStangz Boyfriend). He was the original owner and is a master tech. He is very meticulous with the car and everything was done right. Since I bought the car I have spent about $2k on it to get it where I wanted it. The car has the best of the best parts and you want be dissapointed.
The car is DSG and it has approx 27k miles on it and the windows are 5% tint and 15% on the rear.
Here is a complete list of mods
DSG 2003 Cobra
#6130 of 8394
Stiegemier Stage 3 "Oval" port,
2.85" Non slip RR Upper Pulley,
100MM Idlers,
Diablo Mafia
SCT XCAL 2 - tuned by RWTD
KB BAP w/ Wiring Upgrade
Upgraded Viton Supercharger Snout Seal
GM supercharger oil
DFX clutch and PP "26 spline upgrade",
Fidanza Aluminum Flywheel,
Liberty 26 spline input shaft
Centerforce Heavy Duty Throw Out Bearing
GM Synchromesh Trans Fluid
TR 6's ".032",
Gords HE
LFP Large Frame Radiator,
LFP Polished Intercooler Reservoir,
LDC Cooling Mod
Polished Accufab TB + Inlet,
Steeda Tri-ax shifter with Knob
Bassani Catted X-pipe (take cats in or out)
Mac 3" Cat-back
Oil Separator
JLT True Cold Air with 12" K&N Filter (custom Painted)
285 Nitto 555's in front 80% tread left
315 Nitto DR's 35% tread left
Slotted Front Rotors
Carbon Fibre Rear Bumper inserts
Windows tinted
IRS Brace
Siemen Deka 60# injectors and Harness
DynoJet WBC
Raptor Shift Light
Price: $25k Firm
Also I have some other parts for sale for an additional price if interested.
1)Centerline Telstars(15x8,15x3, 275-50-15 ET Street Radials(100miles), Kuhmo 165r15 front tires, 1.25" Hubcentric spacers for front - $900 Extra
2) Brand New DynoTune Dy Nitrous Setup w/ jets from 25-125, Dynotune Window Switch, Dynotune Bottle Heater and DynoTune Purge Kit - $600 Extra
3)H&R Race Springs - $150 Extra
I will sell the car with any of the parts listed above if interested. If not they will be sold seperately. If you are interested let me know and I can get you some more pictures
Thanks
Jeremy
[email protected]
Here is a couple pictures
