Not sure if this belongs here but I have seen amps in here before soo...
I have a used Memphis 16-MCH600. Its a 5 channel amp so it will pretty much run your whole system. This amp retails for $500. I'd like to get $275 shipped. Here are the specs on it :
5-Channel MClass Series Amplifier
Class-AB / Class-D Hybrid Amplifier
Compact Aluminum Chassis with Custom Black Pearl Finish
Gold Plated RCA Connectors
Full MOSFET Design
Fully Variable Crossover: HP/LP (40 Hz - 6 kHz) (Channels 1-4)
Fully Variable Crossover: LP (50 Hz - 250 Hz), Subsonic (20 - 50 Hz) (Channel 5)
4-Way Protection Circuitry
Platinum Finish Wire Connections
Accepts 4 Gauge Power and Ground Wire
Optional Wired Remote Gain Control
Adjustable Input Sensitivity: 200mV - 4V
Dimensions: 20.85" L x 7.6" W x 2.4" H
Number of Channels 5
RMS Power (4 ohms) 55 watts x 4 chan. + 100 watts x 1 chan.
RMS Power (2 ohms) 75 watts x 4 chan. + 200 watts x 1 chan.
RMS Power (1 ohm) Not Stable + 400 watts x 1 chan.
Bridged RMS Power 150 watts x 2 chan.
Peak Power Output 1400 watts approx.
Min. Impedance Unbridged 2 ohms (Channels 1-4), 1 ohm (Channel 5)
Min. Impedance Bridged 4 ohms
THD @ Rated RMS Power 0.03%
Built-in Crossover HP (40 Hz - 6 kHz), LP (40 Hz - 6 kHz) + LP (50 - 250 Hz), Subsonic (20 - 50 Hz)
Signal-to-Noise Ratio 95 dB
Fuse Rating 25A x 3
I have a used Memphis 16-MCH600. Its a 5 channel amp so it will pretty much run your whole system. This amp retails for $500. I'd like to get $275 shipped. Here are the specs on it :
5-Channel MClass Series Amplifier
Class-AB / Class-D Hybrid Amplifier
Compact Aluminum Chassis with Custom Black Pearl Finish
Gold Plated RCA Connectors
Full MOSFET Design
Fully Variable Crossover: HP/LP (40 Hz - 6 kHz) (Channels 1-4)
Fully Variable Crossover: LP (50 Hz - 250 Hz), Subsonic (20 - 50 Hz) (Channel 5)
4-Way Protection Circuitry
Platinum Finish Wire Connections
Accepts 4 Gauge Power and Ground Wire
Optional Wired Remote Gain Control
Adjustable Input Sensitivity: 200mV - 4V
Dimensions: 20.85" L x 7.6" W x 2.4" H
Number of Channels 5
RMS Power (4 ohms) 55 watts x 4 chan. + 100 watts x 1 chan.
RMS Power (2 ohms) 75 watts x 4 chan. + 200 watts x 1 chan.
RMS Power (1 ohm) Not Stable + 400 watts x 1 chan.
Bridged RMS Power 150 watts x 2 chan.
Peak Power Output 1400 watts approx.
Min. Impedance Unbridged 2 ohms (Channels 1-4), 1 ohm (Channel 5)
Min. Impedance Bridged 4 ohms
THD @ Rated RMS Power 0.03%
Built-in Crossover HP (40 Hz - 6 kHz), LP (40 Hz - 6 kHz) + LP (50 - 250 Hz), Subsonic (20 - 50 Hz)
Signal-to-Noise Ratio 95 dB
Fuse Rating 25A x 3
