kenne bell install tips

[the50ho]

About to install my Kenne Bell on my 98 cobra.

Just wondering if anyone here has any tips or tricks I should know before I get started.

Thanks!

 

[SVTHorsnake]

Originally posted by the50ho
About to install my Kenne Bell on my 98 cobra.

Just wondering if anyone here has any tips or tricks I should know before I get started.

Thanks!

I've hear you can't go wrong doing the following:

- Remove all head work from your car
- Install KB on Manifold with heads connected
- Place in box with $200
- Send to 5905 Oakhill Dr. SLC Utah 84121
- I will send back my heads and use $100 of the money you sent for shipping
- Then, close the hood and you're SC!!!












sorry, Good Luck with the install. Sorry I don't have any tips:beer:

 

[99cobrablack]

Pull hood and lay down cloth diapers or something soft to protect that beautiful bright atlantic blue paint.

 

[kb97]

I wouldn't run the kb chip very long. Get it tuned, or at least have the a/f ratio checked to make sure your chip is ok. I ran the kb with the bap and fmu on a stock fuel sys(injctrs, maf, fp) for about a year and a half with a jms chip with no problems, but just recently upgraded the 42lb'ers, 255lph fp and 80mm pro-m maf and went with a TwEEcer for the tune. You can see some pics of my car with the kb at www.msnusers.com/97cobra click pics to see all. Good luck.