Anyone else on this board use the SCT Pro Racer software? I would be very intersted in discussing your tune versus mine--how much spark, tranny settings, spark mod tables for air temp, spark retard after tip-in, etc........
Also, I use the OBD-II software and find it to be very good, but with a slow sample rate.
One of the interesting OBD readings is air temp, my sensor is mounted after the intercooler. Generally, I get air temps post intercooler (modified trilogy kit, custom tune) of about 30-32 degrees F above ambient. With 9lbs of boost, that seems like a pretty efficient intercooler performance. I would be interested in numbers from other blown Maruaders.
Finally, I also have an Innovative Motorsports LM-1. I just get MAF voltage, rpm, and lambda. I am hardly an expert with the thing and would like to consult with another Maruader owner.
Thanks!
Also, I use the OBD-II software and find it to be very good, but with a slow sample rate.
One of the interesting OBD readings is air temp, my sensor is mounted after the intercooler. Generally, I get air temps post intercooler (modified trilogy kit, custom tune) of about 30-32 degrees F above ambient. With 9lbs of boost, that seems like a pretty efficient intercooler performance. I would be interested in numbers from other blown Maruaders.
Finally, I also have an Innovative Motorsports LM-1. I just get MAF voltage, rpm, and lambda. I am hardly an expert with the thing and would like to consult with another Maruader owner.
Thanks!