Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
The Terminator
Engine/Tuning
Post FPDM Boost A Pump Install
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="AMB" data-source="post: 6698233" data-attributes="member: 8564"><p><strong>EvilTwin</strong></p><p></p><p>I beleive you have it installed wrong !! If you install The BAP after the FPDM, you have to install the wiring upgrade to the input of the FPDM and then install the BAP to the output of the FPDM. You are trying to install BOTH to the output of the FPDM, that is why is doing what it is doing. If you still want to install the BAP to the output of the FPDM, you will need to change the wiring to:</p><p></p><p>Relay pin #87-is OK</p><p>Relay pin #30- goes to the DG/YE Wire to the FPDM Conector Plug</p><p>Relay pin #86-goes to the DG/YE Wire from the stock wiring harness</p><p>Relay pin #85-is OK</p><p></p><p>The BAP red fused input wire goes to the Brown/Pink Wire going TO the FPDM Connector Plug.</p><p></p><p>The BAP red output wire goes to the Brown/Pink Wire in the Harness going TO the Pumps.</p><p></p><p>I would recomend to change the BAP to pre FPDM, sens you have change it anyway. If you do, hears how:</p><p></p><p>Relay pin #87-is OK</p><p>Relay pin #30-goes to the Red Fused BAP input wire</p><p>Relay pin #86-goes to the DG/YE Wire from the stock wiring harness</p><p>Relay pin #85-is OK</p><p></p><p>The BAP Red output Wire goes to the DG/YE Wire to the FPDM Conector Plug</p><p>Reconnect the BR/PK Wires together.</p></blockquote><p></p>
[QUOTE="AMB, post: 6698233, member: 8564"] [b]EvilTwin[/b] I beleive you have it installed wrong !! If you install The BAP after the FPDM, you have to install the wiring upgrade to the input of the FPDM and then install the BAP to the output of the FPDM. You are trying to install BOTH to the output of the FPDM, that is why is doing what it is doing. If you still want to install the BAP to the output of the FPDM, you will need to change the wiring to: Relay pin #87-is OK Relay pin #30- goes to the DG/YE Wire to the FPDM Conector Plug Relay pin #86-goes to the DG/YE Wire from the stock wiring harness Relay pin #85-is OK The BAP red fused input wire goes to the Brown/Pink Wire going TO the FPDM Connector Plug. The BAP red output wire goes to the Brown/Pink Wire in the Harness going TO the Pumps. I would recomend to change the BAP to pre FPDM, sens you have change it anyway. If you do, hears how: Relay pin #87-is OK Relay pin #30-goes to the Red Fused BAP input wire Relay pin #86-goes to the DG/YE Wire from the stock wiring harness Relay pin #85-is OK The BAP Red output Wire goes to the DG/YE Wire to the FPDM Conector Plug Reconnect the BR/PK Wires together. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
The Terminator
Engine/Tuning
Post FPDM Boost A Pump Install
Top