What supporting mods are needed to go LOW on the S550S with the performance package ? With the 11-13s new struts/shocks... Caster camber plates..... And a Panhard bar were recommended.
Supporting mods?
- Thread starter ATTFighter
- Start date
At the moment there is not much available except springs and sway bars. I have done both and the car drives really nice and handles even better. Once someone comes out with a bushing kit for it and coil overs I will be switching out so I can go lower and stiffer.
According to Steeda, on the S550 you do not need caster/camber plates when running just springs that lower 1 inch. When I get coil overs I will run them for sure.
According to Steeda, on the S550 you do not need caster/camber plates when running just springs that lower 1 inch. When I get coil overs I will run them for sure.
It's going to be basically the same formula as the S197 cars (with some additional bushings in the rear).
I'm lowered on Sportlines.. need to get an alignment done. Hoping its no issue
Alignment is all I needed and what most will need. Until adj arms are released theirs not much you can do to the IRS. The front is the same thing as the older years. Nothing crazy. Had mine done at Ford.
I thought I read something about the cradle pushing to one side and needing some sort of support when lowered?
Last edited:
Users who are viewing this thread
