TPMS sensor programming
- Thread starter BOD89LX
- Start date
I would think you could use any tpms sensor...it only has a special one because the normal ones failed going 200 MPH I thought.
No they are different for the 2013 GT500's due to high speed balance problems. I know someone put some new wheels on there 2013 and had to breal=k down the wheels and install the 13 GT500 specfic sensors and they are $270 bucks each or $800 for a set from ford. I have pulled the sensors from my base wheels that I sold and want to get 2 extra ones for my drag radials but not sure if my tool will work and dont want to put it in train mode then not be able to get the to work.
Ok, I just spoke with my Service Manager, and then I called SVT to verify. They both said the same thing. If you are using 2013 Wheels (either Base or PP) you must use the 2013 TPMS. If you are using aftermarket or Pre 13 Ford Wheels you can use the 2010-2012 TPMS. The Programming tool works for All TPMS since 2007.
OK thanks I will try the pre 13 sensors on my drag radials wheels and see if I can get them programed, I know someone tried the American muscle sensor set and they wouldnt program on the 13 and he had to pull them out and use the 13 sensors, maybe it was a fluke.
I have a set of HRE on my 2013 and I used them on my 2012 with sensors installed and had no problems on either car. They programmed themself without any tool.
So do your HRE's have the 2013 or 2012 sensors in them??
My sensors was installed for my 2012 wheels which are HRE. They cost me $47.00 each
Wheel Experts
2825 Exchange Blvd
Suite 105
Southlake, TX 76092
877-681-0700
This company is the ones that I brought my wheels from
Users who are viewing this thread
