Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Mustang Forums
2011-2014 Mustangs
Power-Adders
Tvs 1.72 60ft not spinning,can't get any better. Change stall/pulley any tips.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Scott8583" data-source="post: 15031978" data-attributes="member: 163420"><p>Did you log your run to see what your launch timing is? 32psi is way too high, even though you have a great tire, it should spin at that pressure. If it's not then you definitely don't have enough timing down low. That tire is not too big, I ran heavier 315/15/40 Nitto's last year at the same power level. I've also been 1.43 60' on that same tire (15psi) this year, so the tire is not your problem. Have someone video the tire on launch to see if your spinning or crawling off the line. </p><p>You should be bringing up your converter to 1200 rpm and flash it from there. My stock converter starts to push around 1800rpm last time I checked it out on the street.</p><p></p><p>Here's an old time slip of mine with a 79mm pulley on NT05's. You can kinda compare to yours. Mine was falling on its face on the big end. Looking back now, I can see why. Mine was pulling timing in high gear. Had the same problem at the beginning of this season. Looking back at my logs I should have been in the 10.49 - 10.52 range w/ the 79mm pulley.</p></blockquote><p></p>
[QUOTE="Scott8583, post: 15031978, member: 163420"] Did you log your run to see what your launch timing is? 32psi is way too high, even though you have a great tire, it should spin at that pressure. If it's not then you definitely don't have enough timing down low. That tire is not too big, I ran heavier 315/15/40 Nitto's last year at the same power level. I've also been 1.43 60' on that same tire (15psi) this year, so the tire is not your problem. Have someone video the tire on launch to see if your spinning or crawling off the line. You should be bringing up your converter to 1200 rpm and flash it from there. My stock converter starts to push around 1800rpm last time I checked it out on the street. Here's an old time slip of mine with a 79mm pulley on NT05's. You can kinda compare to yours. Mine was falling on its face on the big end. Looking back now, I can see why. Mine was pulling timing in high gear. Had the same problem at the beginning of this season. Looking back at my logs I should have been in the 10.49 - 10.52 range w/ the 79mm pulley. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Mustang Forums
2011-2014 Mustangs
Power-Adders
Tvs 1.72 60ft not spinning,can't get any better. Change stall/pulley any tips.
Top