what wire is for +12V dash lighting

[blownby]

Anyone know where a good spot to find and tap for guage?

Thanks

 

[DarkHorse305]

If you have a manual, there is an unused plug for the automatic shifter that you can tap into for ignition switched power. Pin number five (light blue yellow) is power and pin 1 (black) is ground.

Otherwise you can also run wiring to the Smart Junction junction and tap into the following wires or use an add-an-amp directly to the fuses:

C2280D Pin 13 ---- F2 ---- 15A ---- Hot Always
C2280D Pin 10 ---- F13 ---- 5A ---- Hot Always
C2280D Pin 11 ---- F14 --- 10A ---- Hot Always (Shared w/ Front Display Module / NAV)
C2280A Pin 15 ---- F16 --- 15A ---- Hot Always
C2280D Pin 2 ----- F18 --- 20A ---- Hot Always
C2280D Pin 9 ----- F25 --- 10A ---- Hot Always
C2280A Pin 8 ----- F40 --- 20A ---- Hot Always
C2280D Pin 4 ----- F38 --- 20A ---- Hot Always
C2280A Pin 7 ----- F41 --- 15A ---- Accessory Delay Relay (Shared w/ interior stuff)
C2280D Pin 32 ---- F47 --- 30A ---- Accessory Delay Relay (Circuit Breaker, Not Fuse)
C2280B Pin 6 ----- F33 --- 10A ---- Hot in Start or Run
C2280B Pin 9 ----- F35 --- 10A ---- Hot in Start or Run (Shared w/ Body Control Module B)
C2280D Pin 5 ----- F32 --- 20A ---- Hot in Start or Run
C2280B Pin 13 ---- F37 --- 10A ---- Hot in Start or Run
C2280B Pin 12 ---- F46 --- 7.5A --- Hot in Start or Run (Shared w/ Overhead Console)
C2280B Pin 3 ----- F43 --- 10A ---- Hot in Run or Accy (Shared w/ Heated Seat Relay)

 

[blownby]

Thanks, but I need to know which wire is for the dash lights. For dimmer control.