Here's the deal, sold my nbm 1999 Z28 and thought I'd buy my friends fox and make a quick drag/street car. Well bought it and really do not have the time for it.
Asking 3,500 obo
If interested PM or email me at [email protected]
clean title 1991 Foxbody:
-Everything is BRAND NEW-
6 point cage
granateli lower a-arms and k-member
coil over front end w/ drag shocks and adj. camber plates
5 bolt 9in rear w/ disc brake, Strange 3rd member, 33 spline, full spool and 3.90 gear
Comp Eng. rear sway bar
jegster drive shaft loop
Comp. Eng. 3 way adj. drag shocks
aftermarket upper/lower rear arms
fuel cell in hatch
new race seats
new carpet
original interior (black/grey)
Is still a 5 speed car setup w/ stock fuel injection
Lakewood bellhousing for sbf to bolt up any Tremec tranny
all new 3/8 fuel line
All brand new crystal clear headlight/marker/turn signals
new front bumper
Battery box/mount for trunk and a cable, and turn off/on switch
There is more that comes with this car, i just cant think of everything. I will update the list when I double check
All it needs is a motor, tranny, exhaust and driveshaft and the work put into it to finish it. And I do have all the factory wiring harness and stock fuel injected motor. Almost put a 2002 5.3 in this, but didn't. If ur interested in the swap, I have the complete harness, computer, motor and 2wd tranny.
Link to 5.3 pics. $1000 for motor, tranny, harness and PCM has 92,000 and was told it runs very good but I never personally heard it. http://s108.photobucket.com/albums/n21/jj_z28/motor/
PHOTOBUCKET gallery of pics of the the Foxbody - Taken Sept. 4, 2008
http://s108.photobucket.com/albums/n21/jj_z28/Roller Mustang/
Thanks for lookin
Asking 3,500 obo
If interested PM or email me at [email protected]
clean title 1991 Foxbody:
-Everything is BRAND NEW-
6 point cage
granateli lower a-arms and k-member
coil over front end w/ drag shocks and adj. camber plates
5 bolt 9in rear w/ disc brake, Strange 3rd member, 33 spline, full spool and 3.90 gear
Comp Eng. rear sway bar
jegster drive shaft loop
Comp. Eng. 3 way adj. drag shocks
aftermarket upper/lower rear arms
fuel cell in hatch
new race seats
new carpet
original interior (black/grey)
Is still a 5 speed car setup w/ stock fuel injection
Lakewood bellhousing for sbf to bolt up any Tremec tranny
all new 3/8 fuel line
All brand new crystal clear headlight/marker/turn signals
new front bumper
Battery box/mount for trunk and a cable, and turn off/on switch
There is more that comes with this car, i just cant think of everything. I will update the list when I double check
All it needs is a motor, tranny, exhaust and driveshaft and the work put into it to finish it. And I do have all the factory wiring harness and stock fuel injected motor. Almost put a 2002 5.3 in this, but didn't. If ur interested in the swap, I have the complete harness, computer, motor and 2wd tranny.
Link to 5.3 pics. $1000 for motor, tranny, harness and PCM has 92,000 and was told it runs very good but I never personally heard it. http://s108.photobucket.com/albums/n21/jj_z28/motor/
PHOTOBUCKET gallery of pics of the the Foxbody - Taken Sept. 4, 2008
http://s108.photobucket.com/albums/n21/jj_z28/Roller Mustang/
Thanks for lookin
Last edited:
