2016 Dodge Challenger Hellcat Go Mango M6 $64,750 $59,000
This is a turn-key (actually push-button), reliable, almost 900 RWHP car. Bought her with 4,500 miles on the car and haven't had an issue. This car makes tons of power, drives solid/tight, and is very comfortable. I would not hesitate to take this car across the country tomorrow. I've put a lot of time and energy into this car and it is well document on how I take care of things.
Car is located in the NW Suburbs of Chicago.
22,700 Miles
886 RWHP / 744 RWTQ (E85) Tuned by Curt Dusterhoff
Engine
* Jokerz Ported Snout & Bearing Plate
* Forced Inductions Heat Reduction Blower Spacer Plate Kit
* GripTec 2.85” Pulley w/ Gates RPM Belt
* Dual Pinned Crank
* Nick Williams 108mm Throttle Body
* JLT Cold Air Intake
* Jet 180 Degree Thermostat
* AAD Performance Catch Can w/ Adjustable Idler Pulley
* UPR Valve Cover Breather
* Corsa Xtreme Catback Exhaust w/ Quad Black Diamond 3.5" Pro Series Tips
Fuel System
* Flex Fuel Tuned
* FIC 1200 Injectors
* Injected Gasohol Dual Pump Fuel System
Suspension
* AAD Performance Front & Rear Control Arm Package – Anodized Red
* Eibach Lowering Springs
* BWoody Shortened Rear Sway Bar Links
* BMR Bushing Kit Rear Cradle Lockout
* Rear Strut Tower Brace (Custom)
* Per4mance Development DIRS Rear Differential Brace
Drivetrain
* Barton Industries Short Throw Shifter
* Aftermarket Clutch (Unknown/on the car when I bought it, but holds the power no problem and works well)
* CCI 4” Aluminum Driveshaft (Zero vibration)
Wheels
* BC Forged KL12 Wheels Matte Black 20x10” w/ Nitto NT555G2 295/35R20 (Front)
* BC Forged KL12 Wheels Matte Black 18x10.5” w/ Nitto NT555R2 315/40R18 (Rear)
* Rays Engineering FN-II Formula Sealed Lug Nuts
Miscellaneous
* GripTec Pulley 2.75 (Needs more fuel pump, but will hit over 900RWHP w/ this pulley on E85)
* Extra Gates RPM Belt
* HP Tuners MPVI 2 OBDII Interface Tool & Cable
* Pedal Commander
This is a turn-key (actually push-button), reliable, almost 900 RWHP car. Bought her with 4,500 miles on the car and haven't had an issue. This car makes tons of power, drives solid/tight, and is very comfortable. I would not hesitate to take this car across the country tomorrow. I've put a lot of time and energy into this car and it is well document on how I take care of things.
Car is located in the NW Suburbs of Chicago.
22,700 Miles
886 RWHP / 744 RWTQ (E85) Tuned by Curt Dusterhoff
Engine
* Jokerz Ported Snout & Bearing Plate
* Forced Inductions Heat Reduction Blower Spacer Plate Kit
* GripTec 2.85” Pulley w/ Gates RPM Belt
* Dual Pinned Crank
* Nick Williams 108mm Throttle Body
* JLT Cold Air Intake
* Jet 180 Degree Thermostat
* AAD Performance Catch Can w/ Adjustable Idler Pulley
* UPR Valve Cover Breather
* Corsa Xtreme Catback Exhaust w/ Quad Black Diamond 3.5" Pro Series Tips
Fuel System
* Flex Fuel Tuned
* FIC 1200 Injectors
* Injected Gasohol Dual Pump Fuel System
Suspension
* AAD Performance Front & Rear Control Arm Package – Anodized Red
* Eibach Lowering Springs
* BWoody Shortened Rear Sway Bar Links
* BMR Bushing Kit Rear Cradle Lockout
* Rear Strut Tower Brace (Custom)
* Per4mance Development DIRS Rear Differential Brace
Drivetrain
* Barton Industries Short Throw Shifter
* Aftermarket Clutch (Unknown/on the car when I bought it, but holds the power no problem and works well)
* CCI 4” Aluminum Driveshaft (Zero vibration)
Wheels
* BC Forged KL12 Wheels Matte Black 20x10” w/ Nitto NT555G2 295/35R20 (Front)
* BC Forged KL12 Wheels Matte Black 18x10.5” w/ Nitto NT555R2 315/40R18 (Rear)
* Rays Engineering FN-II Formula Sealed Lug Nuts
Miscellaneous
* GripTec Pulley 2.75 (Needs more fuel pump, but will hit over 900RWHP w/ this pulley on E85)
* Extra Gates RPM Belt
* HP Tuners MPVI 2 OBDII Interface Tool & Cable
* Pedal Commander
Last edited: