Code This nvr ends

[11_Ingot5.0]

hey everyone,

so I was driving around last Friday and all of a sudden my idle was crazy stuck at 2000 rpms when in neutral then I shift into first and it goes back to normal. I was like wtf is going on. I checked the engine and noticed I had a crack rubber cap on my CJ passeneger side manifold. I fixed that and then see a check engine light I get a P0507 code. I check everything no other vacuum leaks maf was cleaned check the throttle body area. I cleared the code and now when I go start the car up it turns over then dies instantly like the idle is so low it stalls. Now I'm lost anyone have any solution or had this same issue. I haven't don't any mods or anything recently

 

[03Sssnake]

Anymore codes? Probably a TB and or MAF issue, though you still could have a big vacuum leak. Maybe go over the intake manifold bolts for shits and grins.

 

[Gpcalero]

Maybe it was trying to keep itself alive before you fixed the vacuum leak (hence the 2000rpm) and now the learned parameters are killing it. Try a KAM reset.

 

[Ultrakla$$ic]

^^^^^That

 

[11_Ingot5.0]

Found a crack in my CJ manifold

 

[nosscort]

Found a crack in my CJ manifold

That's no good!

 

[Gpcalero]

Found a crack in my CJ manifold

Another one?