INFAMOUSSMIEGAL
Banned
I know im on the list, Cool
Fastest/Quickest Track Times
- Thread starter GodStang
- Start date
Quickest Ported Eaton Only (Stolen from IronTerp)
1) iBiTe03......................9.910 @ 138.76 w/ 1.371 (Posi Port/6spd/SRA/Cams)
2) BADASS03SVT............9.94 @ 135 (Posi Port/Auto/SRA)
3) F8LSNAKE..................10.34 @ 132.00 w/ 1.49 (6spd/SRA)
4) CobraStruck...............10.48 @ 132.93 w/ 1.58 (6spd/IRS)
5) sonic03snake..............10.55 @ 130.35 w/ 1.44 (6spd/SRA)
6) Rice Eatr....................10.59 @ 126.74 w/ 1.53 (6spd/SRA)
7) Soap.........................10.65 @ 130.80 w/ 1.57 (6spd/SRA)
8) Stinkapuss.................10.68 @ 130.62 w/ 1.59 (6spd/IRS)
9) 03flamedcobra............10.78 @ 127.?? w/ 1.48 (6spd/SRA)
10) SJ-KY........................10.79 @ 127.28 w/ 1.58 (6spd/IRS)
Why have the type of port for the top 2 people, that is irrelevant info. Doesn't matter if it was a Posi port or a Stiegemeier or other. Should they also add the brand of gas or tires they used?
1) iBiTe03......................9.910 @ 138.76 w/ 1.371 (Posi Port/6spd/SRA/Cams)
2) BADASS03SVT............9.94 @ 135 (Posi Port/Auto/SRA)
3) F8LSNAKE..................10.34 @ 132.00 w/ 1.49 (6spd/SRA)
4) CobraStruck...............10.48 @ 132.93 w/ 1.58 (6spd/IRS)
5) sonic03snake..............10.55 @ 130.35 w/ 1.44 (6spd/SRA)
6) Rice Eatr....................10.59 @ 126.74 w/ 1.53 (6spd/SRA)
7) Soap.........................10.65 @ 130.80 w/ 1.57 (6spd/SRA)
8) Stinkapuss.................10.68 @ 130.62 w/ 1.59 (6spd/IRS)
9) 03flamedcobra............10.78 @ 127.?? w/ 1.48 (6spd/SRA)
10) SJ-KY........................10.79 @ 127.28 w/ 1.58 (6spd/IRS)
Why have the type of port for the top 2 people, that is irrelevant info. Doesn't matter if it was a Posi port or a Stiegemeier or other. Should they also add the brand of gas or tires they used?
I have the type of ports on the people cars that I know. I got this list from searching and people submitting. If you read the twin screw section it has which brand blower, what size blower, what psi and some times what pulley combo. Who ported it is very important. Not all Ports are the same hence the reason on Posi Ports have been in the 9s. Also was it done on a Steig stage I/II/III/IV/V/ or snake bite. That makes a HUGE difference. If I can get more info on the cars I have listed I would gladly added it. At this time I don't. If you are not happy with my list make your own just don't steal my info....
Last edited:
:bored:
Get off your high horse and relax. 1) I never said I wasn't happy with your list I simply asked a question and 2) the info you posted is quite public and not "your info" to be stolen.
Kinda ironic you say not to steal your info, yet part of your info says "Stolen from IronTerp".
Last edited:
Actually he PMed it to me so no it was not stolen I was just giving him credit since he started that part. I will try and add everyone's blower setup for that particular run. The whole point of this list was to give people as much info as possible in a small space to answer the questions (what can I run with this setup). Yes it is not very detailed but some of the posts are just time slips and also they have switched combos. So finding what they ran on that day with that combo will be hard but I will see what I can find.
Ironterp's original list that he sent me did not have what blower. I felt it was important so when I added to his list I added what blower. I have only added/modded 2 and they both had Posi's. Like I said before I will try and find everyone else's.
Quickest/Fastest Non-Ported Eaton 2 Valve...
11.69@119
Sorry, I couldn't resist... I'm sure this thread is for termi's.... LOL
11.69@119
Sorry, I couldn't resist... I'm sure this thread is for termi's.... LOL
Last edited:
2.3 whipple 6spd/IRS 19lbs 4lb lower / 3.2 upper
1.578 60 ft
6.88 1/8th 101.4 mph
10.62 @ 133.17
Car is now 60 fting consistent 1.5's and mph is 135 with the same combo. 1/4 mile times have suffered because of a slipping clutch. Spec twin disc is now installed and should have some new times soon!
1.578 60 ft
6.88 1/8th 101.4 mph
10.62 @ 133.17
Car is now 60 fting consistent 1.5's and mph is 135 with the same combo. 1/4 mile times have suffered because of a slipping clutch. Spec twin disc is now installed and should have some new times soon!
Dang I need to beat the 10.79 to get on your list. So far it's a [email protected].
MVD most others on that list I'm sure were/are Stieg blowers because I wasn't around. That would be a safe bet IMO. Some of those have upgraded blowers now that are mine but I won't say who because they're my customers and if they want people to know then they can post it.
MVD most others on that list I'm sure were/are Stieg blowers because I wasn't around. That would be a safe bet IMO. Some of those have upgraded blowers now that are mine but I won't say who because they're my customers and if they want people to know then they can post it.
Mine was a hand me down steg stg IV with a 2.93/6lb pulley combo. Any other info you need, just hit me up. Hope to have you some good twin screw times coming soon as our race series is over and I can hopefully get some good 1/4 mile passes in since the air is starting to cool off.:beer:
Congrats to Ibite! Awesome run brotha!
Last edited:
Very nice!:rockon:
Thanks Larry.:beer:
So there's only ONE unported Eaton with stock drivetrain (6spd/IRS) that's run under
11's? 10.88 is the only 10 second pass EVER? I find that hard to believe, Hell Mr. Patience's 99 ran 11.70's with 312RWHP with the stock T-45 and IRS?? You'd think ONE other guy would have dialed in the suspension and lost some weight to run a 10? Sorry to resurrect an old thread but Godstang linked it in a reply today!
11's? 10.88 is the only 10 second pass EVER? I find that hard to believe, Hell Mr. Patience's 99 ran 11.70's with 312RWHP with the stock T-45 and IRS?? You'd think ONE other guy would have dialed in the suspension and lost some weight to run a 10? Sorry to resurrect an old thread but Godstang linked it in a reply today!
Last edited:
@ Brutal Metal. I ran 11.0s with irs and unported with a crappy 60' in the heat and trapped as high as 130. Nobody believed it at the time, but it was on video and had several witnesses. I had hoped to go after the 10.80s with it on a better prepped track, but got a deal I couldn't pass up on a ported blower the next week. 1st pass with the ported blower the next time out I went 10.94 while missing 4th gear. Not long after that I got a deal on a sra and eventually ran 10.30s with it before putting a KB on it.
I feel there have probably been others to run that well, they just probably were not on the internet.
I feel there have probably been others to run that well, they just probably were not on the internet.
Last edited:
Cool thanks for your info F8, I didn't realize that plateau was such a tough achievement!
I wonder if Jake ever did track passes before he sent the Eaton to Brian?
I wonder if Jake ever did track passes before he sent the Eaton to Brian?
Last edited:
I personally think that number could be pushed a good bit deeper in the 10s, but most folks upgrade before they get to that point. That was what happened in my case. If someone wants to give me a stocker to play with, I'll gladly go after all these milestones. LOL!
Sorry to bump and older thread, but is this the quickest 6 speed twin screw car?
13.) rtusnake...................9.66 @ 142.42 w/1.38 60 foot (3.4L, T-56, SRA)
edit: He apparently ran 9.57@143
13.) rtusnake...................9.66 @ 142.42 w/1.38 60 foot (3.4L, T-56, SRA)
edit: He apparently ran 9.57@143
Not sure. There are tons and tons of updating need I just have not gotten around to it.
Users who are viewing this thread
