how do i change out the 4 gauge upgrade alternator power wire

[mmcmillen82]

i was wondering how to swap out the alternator wire upgrade... i took the old one out but was wondering what to do with the little green wire that was connected inside the stock wire... also do i just put the end to the battery or the accessory post?

 

[funtruck]

I did the same as you and then realized the removal was unnecessary. Basically you can leave your stock wiring in place. Just add the 4ga wire from the alternator post to the power block directly behind your battery (in between your battery and the fender spring perch). The power block terminal is a virtual positive battery terminal.

 

[SVT_Troy]

I upgraded all my wires to a 0 awg battery to junction box, junction box to altenator, battery to ground and battery to starter