Has anyone tried this setup with a stock k member? I am considering attempting it.
Looking at the pics it won't work with a stock k member. The stocker isn't open on the side like an aftermarket k member.
Misspelling brought to you by tapatalk
Has anyone tried this setup with a stock k member? I am considering attempting it.
wonder if this kit will work as a compound boost setup??
I started to mount the turbo support bracket, but....I ran into what I consider the "first snag"... I am running an U/D alt pulley (BFAP!!!) and an U/D Water Pump Pulley.....and I am also running my belt differently then just about anyone I have seen....well....it won't work for me. I am going to grind some material off, and hope that will do it!
View attachment 218135
Just a heads up, before even starting to mock/mount the turbo....loosen all the bolts on each side of the housings, so you can swivel/rotate/clock them into position. Then when you get everything lined up, just snug a few down while mounted....and pull it out and tighten them all up!
If you install the oil feed first like I did, you will need to remove a few of those bolts on the compressor housing to rotate it to the correct position.
More to come!