Ok I'm finally got all my parts ready to change the pully and install the chickenears cai. Since I ride a 2000L I also have the 90mm MAF. Will this be as simple as:
1. unplug the battery
2. remove stock intake
3. disconnect stock maf
4. put in new intake and maf
5. re-connect battery
6. flash the computer using a new 90mm tune
Does this sound about right?
Thanks!
1. unplug the battery
2. remove stock intake
3. disconnect stock maf
4. put in new intake and maf
5. re-connect battery
6. flash the computer using a new 90mm tune
Does this sound about right?
Thanks!