I'm working on this right now and, though it might be an error on my part, can only find 2 holes in line on the right side of the blower (when facing it from the rear). On the image above there is the top vacuum port, the evap emissions port an the boost port all in line, but on my stock eaton i only have two in the line, and they are the fittings that the red hoses go into when the setup is stock.
In other words, it seems that i am not locating the evap. emissions port or bottom vacuum port that runs to the passenger fenderwell.
Any tips as to what i'm overlooking?
Thanks
In other words, it seems that i am not locating the evap. emissions port or bottom vacuum port that runs to the passenger fenderwell.
Any tips as to what i'm overlooking?
Thanks
Last edited: