I have:
Stock 2004 mach 1 solid rear /w ~70k miles
Bilstein HD shocks
H&R race springs
SLP loudmouth 2 catback
Notes on exhaust:
Came with the car, never looked inside the mufflers but they sound like LM2s and not LM1s. I had issues with the pipe that leads from the axle loop to the tip falling off so the driver side is welded. The mufflers could use new clamps and the passenger side muffler has a slight dent where the pipe goes in, preventing it from going in 100%. Basically the exhaust could use some TLC.
I want:
Any 01/03/04 IRS. Don't care what exhaust or springs it has.
Due to my exhaust issues I will add cash. You will need to provide a suitable place to do the work. If you want to have a shop do the work, I will split the cost 50/50 assuming the price isn't astronomical.
Stock 2004 mach 1 solid rear /w ~70k miles
Bilstein HD shocks
H&R race springs
SLP loudmouth 2 catback
Notes on exhaust:
Came with the car, never looked inside the mufflers but they sound like LM2s and not LM1s. I had issues with the pipe that leads from the axle loop to the tip falling off so the driver side is welded. The mufflers could use new clamps and the passenger side muffler has a slight dent where the pipe goes in, preventing it from going in 100%. Basically the exhaust could use some TLC.
I want:
Any 01/03/04 IRS. Don't care what exhaust or springs it has.
Due to my exhaust issues I will add cash. You will need to provide a suitable place to do the work. If you want to have a shop do the work, I will split the cost 50/50 assuming the price isn't astronomical.
