black03 said:Sounds more like you're trying to convince yourself that you made the right decision.. :-D
Read below. The 3.4L Kit is a High Pressure Ratio blower!! :beer:
black03 said:Sounds more like you're trying to convince yourself that you made the right decision.. :-D
Read below. The 3.4L Kit is a High Pressure Ratio blower!! :beer:
YellowCobra28 said:I have a 2.93 upper and a 4 lower pulley on my Eaton 04 Cobra. If I get this 3.4L whipple, what rwhp and TQ can I expect to make approx??
03chromecobra said:God I want this but I don't want to rebuild the motor! Should I even consider the 3.4 without a built motor? I know I can run low boost but would it be better to have a smaller twin screw?
YellowCobra28 said:Your initial question was this!!!!
Let someone that knows for sure answer your questions. Maybe you don't have to rebuild your motor, which is what I told you in the previous post. If you don't need to rebuild your motor, then it would NOT be better to have a smaller twin screw. You catch my drift? I was told by an insider at Ford, that the 03 04 Cobra motor can handle 800- 900 HP stock. But that to me sounds very high. But I'm sure there are others that have solid answers. Any day now, we should get the answer that we are looking for. I want to buy this whipple too, so I am curious to know as well. Maybe a direct call to WHIPPLE might answer your question. I am waiting to get someone else's opinions about it.
spincobra03 said:lol this kid mark was standing next to me when writting the post but I meant to say jared.... lol sorry jared!
black03 said:Sounds more like you're trying to convince yourself that you made the right decision.. :-D
Read below. The 3.4L Kit is a High Pressure Ratio blower!! :beer:
Quik Z06 said:What size pulley would require you to modify the hood and what would need to be done? Also besides the upgraded fuel rails would anything else be needed for fuel. I already have a BAP and 60lb injectors.
Quik Z06 said:What boost level is a 4" pulley? I have a 4# lower as well, id like to keep it between 17-20 psi. Id prefer to not have to modify my hood which is why I ask. Thanks