Greetings, Folks
2011 mustang GT
Possible Toe Issue.
Current front suspension mods: Steeda Bump Steer Kit, BMR front Control arms w/ extended ball joints, BMR K-member lowered motor mounts w/brace. BMR radiator support w/brace, GT500 J&M camber caster plates, GT500 Koni Oranges, Ford Racing drop srpings, and Camber bolts.
Okay, after putting the steeda bump steer kit in along with the new control arms from BMR I noticed that the Toe on my passenger side was toed out a little far just by looking at it by eye sight. I have reached the max amount toe in on both passenger and driver side and it still looks like its toed out to far on the passenger side.... I can not adjust the toe in any further on driver or passenger side. ???!!!???? Confused ???!!!???
Any ideas?
Im taking it to the alignment shop in the morning to get another opinion...I have got the Camber set about .5 to 1 degree using my gauge... Caster set to max on both sides all the way back to the firewall.
Toe is about 37 inches in the front and 36 1/2 inches in the back.. Using a tape measure. Can not get it zeroed out. Bumpsteer kit causing the issue?
2011 mustang GT
Possible Toe Issue.
Current front suspension mods: Steeda Bump Steer Kit, BMR front Control arms w/ extended ball joints, BMR K-member lowered motor mounts w/brace. BMR radiator support w/brace, GT500 J&M camber caster plates, GT500 Koni Oranges, Ford Racing drop srpings, and Camber bolts.
Okay, after putting the steeda bump steer kit in along with the new control arms from BMR I noticed that the Toe on my passenger side was toed out a little far just by looking at it by eye sight. I have reached the max amount toe in on both passenger and driver side and it still looks like its toed out to far on the passenger side.... I can not adjust the toe in any further on driver or passenger side. ???!!!???? Confused ???!!!???
Any ideas?
Im taking it to the alignment shop in the morning to get another opinion...I have got the Camber set about .5 to 1 degree using my gauge... Caster set to max on both sides all the way back to the firewall.
Toe is about 37 inches in the front and 36 1/2 inches in the back.. Using a tape measure. Can not get it zeroed out. Bumpsteer kit causing the issue?