pics of TSW NURBURGRING wheels??

[SaleenGT2001]

i searched but cant find any pics of them on a 2011-12. i remember seeing them on someones car on here i thought. if anyone has some pics of them (on a grabber blue car if possible) i would like to see them to help me decide on what to buy.

thanks!!

 

[Jonnyslick]

 

[jmstang66]

sexiest wheel for the new s197s hands down

 

[wtfchuck]

bleh... still not the rtr's... rtr's have more of a concave in them then these

 

[Mustang4vSVT]

agreed i still havnt found a rim I like more than the RTR's. These however arent bad :beer:

 

[IA Shelby]

agreed i still havnt found a rim I like more than the RTR's. These however arent bad :beer:

RTR like wheels exist, just most of them are high dollar forged wheels (HRE, d2 forged, adv 1). There are 3 alternatives to the RTR,

1) Drag 37 - cheap
2) Linea corse 818 (nice wheel, same offset issues but at least comes with 19x10 in the rear.
3)Euronext - Looks decent except for the ugly center cap. Better offset for rear.

TSW nice but too flat. Unless you need to run 285 or bigger on the rear I would go with RTR,

 

[cdog1157]

2) Linea corse 818 (nice wheel, same offset issues but at least comes with 19x10 in the rear

what offset issues are you referring to?

 

[lsp408]

I still think SVTPP wheels look the best. either way, all the wheels (SVTPP, RTR and etc) are pain in the neck to clean but look very good.

 

[cdog1157]

Will 20x10's fit on all four corners without any problems? What's the max size tires front and back I can fit on them?

 

[SaleenGT2001]

i ordered these and am waiting on them to come off backorder in a couple of weeks. i have a new set of 275/35/20 and 315/35/20 Nitto NT05's waiting to go on

 

[cdog1157]

i ordered these and am waiting on them to come off backorder in a couple of weeks. i have a new set of 275/35/20 and 315/35/20 Nitto NT05's waiting to go on

You ordered 20x10's for all four corners?

 

[kingnut]

sexiest wheel for the new s197s hands down

wrong

 

[grnenvy]

I like my SuperSnakes and once I send them out they will be 20/11.5 wide in the rear with 335s on them. Can u say Steam Roller!!

 

[SaleenGT2001]

You ordered 20x10's for all four corners?

no, 8.5 front and 10" rear

 

[1bad04cobra]

I like my SuperSnakes and once I send them out they will be 20/11.5 wide in the rear with 335s on them. Can u say Steam Roller!!

Actually I don't think 11.5 will fit. I remember hearing that from the forgestar rep

 

[JL-KA]

Might have to roll the fenders

 

[Nathan'sTsi]

Actually I don't think 11.5 will fit. I remember hearing that from the forgestar rep

11.5 fit (actually 12s will fit) but only because the SS wheels stick out a little. That small amount lets you widen the inside of the rim more.You justy have to cut the dust cover off of the shock and romve the brakcet on the inside of the fenderwell.

 

[1bad04cobra]

Hmmm

 

[wtfchuck]

i ordered these and am waiting on them to come off backorder in a couple of weeks. i have a new set of 275/35/20 and 315/35/20 Nitto NT05's waiting to go on

please post pics when u get them... curious to see what the 20's look like

 

[SaleenGT2001]

i'll post pics when they come in. should be the first week in july.

anyone know if these will clear brembo's? i'm thinking about upgrading