:shrug:
thats is wrong. a very steep geared mach 4.56-4.88 with full bolt ons -weight big n littltes will see low 12's maybe even high 11's. low 12's is not a big challenge for a mach.
03 mach vs 2010 challenger SRT8
- Thread starter da5deuce
- Start date
:shrug:
thats is wrong. a very steep geared mach 4.56-4.88 with full bolt ons -weight big n littltes will see low 12's maybe even high 11's. low 12's is not a big challenge for a mach.
- Joined
- Jul 14, 2002
- Messages
- 9,444
He said a bolt on Mach can't run 12.2...I was simply pointing out my Mach with only intake, catback, midpipe, and gears will run 12.3. I wasn't saying I will run 12.2's...but I'm also not saying that I won't.
I do... it's all I have. :cryying:
I beat a 392 Challenger... several times actually... His is a manual and apparently only the special internet automatics run low 12s stock.. because his still hasn't done anywhere near that in severely negative DA. :shrug:
Really, I ran a 12.2 @ 113.8 on a +1200 DA. So have many others but hey, its OK you dont know about the 392's real potential.
"special internet automatics" LOL
i trapped 110 with doodoo headers, not the best intake. im sure i could get 3 mph out of real long tubes, a better intake, real o/r mid pipe and not gutted cats , and a ported intake manifold or electric water pump.. hell if i had a mach that had correct cam timing it wouldnt be a problem
Hey Mach Boy, FM1R from MM...
I was putting down a little of 360/340 to the tire N/A. There was a lot more potential there. I was happy with that setup, and my 175 pill.. I hurt a lot of people's feelings
From what I understand it's been done quite a few times..
True
Obviously he cant drive worth a damn if hes not cracking 12's...
12.46 110 stock 6-Speed on 20" Nittos
[nomedia="http://www.youtube.com/watch?v=UynJ07382Qo"]392 SRT8 Challenger - YouTube[/nomedia]
He said a bolt on Mach can't run 12.2...I was simply pointing out my Mach with only intake, catback, midpipe, and gears will run 12.3. I wasn't saying I will run 12.2's...but I'm also not saying that I won't.
Look at all those mods LOL the time I quoted is from a stock 392.....
My point exactly. When I beat stock 5.0's, 03 Cobras and Mach's at the strip they always look confused because they assume 6.1's and 6.4's are 14 second cars based on the internet LOL
Exactly my point. :rolling: On the internet 392s are 11 second cars stock.. I haven't seen it happen yet so label me as a hater until then.
Last edited:
If that's the case neither can I (I was 1 tenth off his best when I drove it at Cordova).... must mean my car is a low 12 second car too. Where did I say he's not running 12s?
Clearly you missed the details of that video btw..... "392 SRT8 Challenger stock with 20" Nitto DRs 12.46 110+" Unless stock = drag radials now?
SRT8Tech knows the pass well... and I believe that is the record for a manual?
Last edited:
It's not that we assume, to be honest we don't see many modded SRT's around these parts. Most of them are stock daily drivers..
That being said I wouldn't mind having one for a DD..
- Joined
- Jul 14, 2002
- Messages
- 9,444
:lol1: 392cid and that is all it can do? Hell that is over 110cid more motor than a turd N/A 4.6L. :lol: I'd run my damn car into a brick wall if I owned a Dodge that couldn't get out of it's own way with over 400rwhp.
oke: LOL!The car is internally stock. No mods if you want to consider 20" DR's a mod then so be it. I could really care less what you think you can be a hater all you want but when you do run across someone like me who knows how to race their SRT8 you will be in all :rolling:
When I had my LS1 cars some of my friends ran 14's while I ran 13 Flats bone stock same with my friends with Mach's. Some couldn't get under 14's while others did low 13's and they could never figure out why lol. Just because your friends car cant break a 12 dosent mean the car isn't capable of doing it. The 6.1 SRT8 is capable of 12's bone stock under perfect conditions and the new 392 is about 4+ cars faster in a race so im sure you can figure that out...
Last edited:
:lol1: 392cid and that is all it can do? Hell that is over 110cid more motor than a turd N/A 4.6L. :lol: I'd run my damn car into a brick wall if I owned a Dodge that couldn't get out of it's own way with over 400rwhp.
In their defense if a Challenger weighed in at 3300lbs like a M1 there wouldn't be a contest here.
- Joined
- Jul 14, 2002
- Messages
- 9,444
Exactly. I've been told I can't outrun a SRT8 period. I've been looking for one to race for months now. I did come across a SRT8 Challenger with paper tags but I wasn't in the Mach. :nonono: :nonono: :nonono: Poor guy, I might could have talked him into taking back the Challenged and getting a GT500.
:lol1: 392cid and that is all it can do? Hell that is over 110cid more motor than a turd N/A 4.6L. :lol: I'd run my damn car into a brick wall if I owned a Dodge that couldn't get out of it's own way with over 400rwhp.
a stock 4000lb Challenger > Stock Mach /thread
I would be mad to
I guess I made this guy take his GT500 back 3 times...:bash:
[nomedia="http://www.youtube.com/watch?v=LsqacI4KhJY"]Charger SRT8 vs GT500 (Irwindale Dragstrip) - YouTube[/nomedia]
- Joined
- Jul 14, 2002
- Messages
- 9,444
That's your opinion. And I agree with you I would take the Challenger.
Then sell it and put the money towards a Mustang.
:shrug: What does that have to do with a paper plate SRT8? Yours is modded.
Users who are viewing this thread
