The Shelby SS hood had quite a few fitment issues but nothing that couldn't be overcome. By the time I brought it to the painter he said it was one of the best fitting fiberglass hood he ever seen. The hood actually required shimming the back up 3/8", slotting and extending the hinges to bring it forward about 1/4" and slotting the latch mechanism to allow the front of the hood to drop abou 3/8". I actually had to have extension pieces welded to the end of the hinges to make them long enough. I also figured while he was mixing paint, might as well add the side scoops! BTW, the stripe material I purchased thru VinylGraphics (manufactured by ORACAL) was an exact match.